I C - S W- 8 T 2 IN-CEILING SUBWOOFER OWNER’S MANUAL AND WARRANT Y
I C - S W - 8 T 2 Thank you for purc hasing your Klipsc h IC-SW-8T2 in-ceiling subwoofer. The IC-SW-8T2 in-ceiling speaker is designed for music reinforcement applications. Unobtrusive, these loudspeakers are engineered for easy, versatile installation. The IC-SW-8T2 features a transformer-less design for 70.7V/100V distributed-line systems.
6. For installations using 70v/100v input connection, set the switch on the front panel to "70V/100V". For low impedance, stereo applications, the switch should be set to 8 ohms stereo. For low impedance, mono applications, the switch should be set to 4 ohm mono. In all cases, please make sure the speaker wires are connected to the appropriate terminal on the back. 60W 70 V 30W 10 0V 5. Insert the speaker into the cutout hole.
I N I C - S W - 8 T 2 - C E I L I N G S U B W O O F E R S P E C I F I C AT I O N S IC-SW-8T2 FREQUENCY RESPONSE C O N T. P OW E R H A N D . C A LC M A X C O N T. O U T P U T @ 1 M SENSITIVIT Y 2.
Klipsc h Limited Warranty KLIPSCH, AUDIO TECHNOLOGIES ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of five (5) years from the date of purchase. During the Warranty period, KLIPSCH will repair or replace (at KLIPSCH’s option) this product or any defective parts (excluding electronics and amplifiers).
3502 Woodview Trace, Suite 200 Indianapolis, Indiana 46268 USA 1. 800 . KLIPSCH • www.klipsch.
