KMC2 Installation and Operation Manual
KMC2 CONTENTS Warnings and Compliance .....................................................................................1 Introduction ............................................................................................................3 Safety Information ..................................................................................................4 Wiring .....................................................................................................................5 Basic Operation ..
KMC2 WARNINGS AND COMPLIANCE apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.
KMC2 FCC Notes WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
KMC2 INTRODUCTION System Features Features of the Klipsch KMC2 marine audio system include: • HannStar2.
KMC2 SAFETY INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. When Boating Keep the volume level low enough to be aware of your surroundings. Protect from Water Do not submerge the product in water, as this can cause electric shorts, fire or other damage. Protect from the Elements Protect the wired commander from sunlight, dust, and water while not in use.
KMC2 WIRING TUNER/AMP MODULE COMMANDER 5
KMC2 BASIC OPERATION Audio Menu Press the MENU button (2) on the control panel to access the audio menu. You can navigate through the audio menu items by rotation the Encoder Knob and pressing the Encoder Knob to make selection. Rotate the Encoder Knob clockwise to increase and counter-clockwise to decrease. The unit will automatically exit the audio menu after 10 seconds of inactivity. The following menu items can be adjusted.
KMC2 System Menu 1. 2. 3. 4. 5. 6. Battery Alarm Operation Press and hold the MENU button (2) for more than 3 seconds to enter the system menu. “SYSTEM MENU” will appear on the display, followed by the first menu item, “Key Beep.” Rotate the Encoder Knob (3) to navigate the system menu and highlight the desired item. Press the Encoder Knob to select the item and rotate the Encoder Knob to adjust the selected menu item. Press the Encoder Knob again to enter your selection and return to the menu list.
KMC2 TUNER OPERATION in the preset list for the selected Band. The new stations replace any stations already stored in that band. PS Press the PS soft button to scan stations stored in the current band list. The unit will pause for ten seconds at each preset station. Press PS again to stop scanning when the desired station is reached. LIST Press the LIST soft button to display the preset list. There are 18 FM and 12 AM preset locations to store your favorite broadcast stations.
KMC2 PTY Press the PTY soft button (9) access search for stations in your area broadcasting RBDS information. NOTE: Radio stations broadcasting RBDS may not be available in your listening area.
KMC2 WEATHER BAND OPERATION LIST Press the LIST soft button to display the preset list. What is the NOAA Weather Radio/ Weatheradio Canada? NOAA (National Oceanic and Atmospheric Administration) is a nationwide system that broadcasts local weather emergency information 24 hours a day via the National Weather Service (NWS) network. The U.S. network has more than 530 stations covering the 50 states as well as the adjacent coastal waters, Puerto Rico, the U.S. Virgin Islands and the U.S.
KMC2 USB MP3 OPERATION Removing a USB Device Press the MODE button (5) to select another mode and then remove the USB device from the USB connector. NOTE: After loading a USB device, files and folders are accessed in the order in which they were written to the device. Therefore, the playing order may not be the same as the order in which they are expected to be played. Accessing USB Mode Switching to USB Mode Press the MODE button (5) to enter mode selection display.
KMC2 Repeat Play Press the RPT soft button during song play to repeat the current file. Press the RPT soft button again to stop repeat play. Random Play Press the RND soft button to play all files in the current folder in random, shuffled order. Press the RND soft button again to stop random play.
KMC2 BLUETOOTH OPERATION The KMC1SU includes built-in Bluetooth technology that allows you to wirelessly connect Bluetooth devices to this head unit for streaming audio playback. • About Bluetooth Technology • Bluetooth is a short-range wireless radio protocol. Operating in the 2.4 GHz range, it transmits voice and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters. • • Knob to choose Lock/Unlock, Disconnect or Delete for this device.
KMC2 appear on the LCD. Press || again to resume playback. If you change to another mode, the mobile phone audio will pause. Press the MODE button (5) to return to BT mode and resume mobile phone audio playback. INFO Press INFO button to view the name of the connected device. NOTE: If a Bluetooth device is disconnected due to the power being turned off or if the device is disconnected inadvertently, the unit will automatically search for the matching Bluetooth device when the power is restored.
KMC2 SPECIFICATIONS TROUBLESHOOTING FM Radio Frequency Coverage (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 107.9 MHz Frequency Coverage (Europe) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87.5 to 108 MHz Sensitivity (S/N = 30dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4uV Image Rejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>45 dB Stereo Separation . . . . .
www.asaelectronics.com v.
