User's Manual

ManualsBrandsKlipsch ManualsAudio EquipmentPortable Bluetooth Speaker system

1. POWER ON / OFF - Tap to turn on. Hold to turn off. Solid

Red indicates Power On, ﬂashes if batteries are weak

BLUETOOTH

Thank You

Thank you for your purchase of the Klipsch

Music Center KMC 3!

The KMC 3 combines legendary Klipsch technology with

Bluetooth

and aptX

™

technology for truly hi-ﬁdelity music playback from

your favorite music device. Its contemporary styling compliments

any décor and you can take it almost anywhere with both AC and

battery-power options.

aC Power

To operate on AC power plug AC adapter into back of the KMC 3

marked DC IN, then plug AC adaptor into a functioning wall socket.

On AC power, if no streaming or connected audio is detected for

one hour the KMC 3 will automatically go into standby mode.

BaTTerY Power

To operate on battery power, install 8 D Cell (LR20) alkaline

batteries as shown. If batteries are installed, the KMC 3 operates

on battery power unless AC power is utilized. On battery power,

if no streaming or connected audio is detected for ﬁve minutes,

the KMC 3 will automatically power off.

1 2 3 54

POWER ON / OFF

VOLUME DOWN

MUTE

VOLUME UP

TRACK REVERSE

PLAY / PAUSE

TRACK FORWARD

SOURCE /

BLUETOOTH

reMoTe ConTrol FunCTions

(

Bluetooth

mode only)

(

Bluetooth

mode only)

(

Bluetooth

mode only)

(See Illuminated Control Functions #2)

illuMinaTed ConTrol FunCTions

Connected

No Connection

Hold to

Disconnect

Hold to Pair

Tap to Exit

3. VOLUME DOWN

4. VOLUME LEVEL INDICATOR

5. VOLUME UP

6. SOURCE SELECT - Pressing + and – together toggles

between

Bluetooth

mode and AUX (3.5mm input) for playback

Summary of content (4 pages)

PAGE 1
Thank You Thank you for your purchase of the Klipsch® Music Center KMC 3! The KMC 3 combines legendary Klipsch technology with Bluetooth® and aptX™ technology for truly hi-fidelity music playback from your favorite music device. Its contemporary styling compliments any décor and you can take it almost anywhere with both AC and battery-power options. AC Power To operate on AC power plug AC adapter into back of the KMC 3 marked DC IN, then plug AC adaptor into a functioning wall socket.
PAGE 2
Device does not play in Bluetooth mode or AUX input • Make sure volume on device is up to maximum/KMC 3 volume is up at least half way and not MUTED • If using AUX input, make sure connections are tight • Touch + and – buttons together to select correct input • If solid blue touch and hold + and – together to switch inputs L W LIP . K SCH The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc. and any use of such mark by Klipsch Group, Inc. is under license.
PAGE 3
Canada Statement This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio RSS-210.
PAGE 4
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.