Operation Manual

Tech Support: 1-800-KLIPSCH
9
Instruction Manual
Step 1: Decide which lights will be replaced with
LightSpeakers
®
.
Your Klipsch
®
LightSpeakers
®
have been specifically
designed to cover large areas, however if the location of
your fixtures allow you to do so, you should think about
how you use your room and where you are likely to spend
most of your time. Then choose the fixtures that are most
evenly spaced to your preferred listening position.
A) Turn off the circuit breaker and light switch, to the
bulbs you intend to replace with LightSpeakers
®
.
B) Remove the existing light bulb.
Step 2: Check your connector
type. Your Klipsch
®
LightSpeaker
®
is designed to fit into a standard
Edison connector. It will not fit any
other type connector.
WARNING!
Turn off circuit breakers to all lighting
fixtures you are working on!
STOP!
Check your connector!