M40 OWNER’S MANUAL
Welcome to Klipsch. Listen with Passion. Congratulations on your purchase and thank you for selecting Klipsch MODE headphones. These active noise cancelling headphones have been crafted with the finest materials – high-grade leather, professional grade memory foam, HiFi inspired woven cables and high-strength polymers – to create a product unmatched in the industry for superior quality and comfort, with the audio performance you would expect from Klipsch.
Important Safety Information 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all these instructions. If you hear ringing or experience pain or discomfort in your ears during or after using any headphone audio product, that is a sign you are listening too loud. When your ears are exposed to high volumes (in excess of 85dB) for over an hour, you may be permanently damaging your hearing.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Standard headphone cable Klipsch Mode headphones AAA battery Apple 3-button controller cable
Leather carrying case Airline adapter Microfiber carrying case 1/4” Stereo adapter
CABLES Klipsch Mode headphones are compatible with all audio sources with a 3.5mm headphone jack using the included standard headphone cable. The included Apple 3-button controller cable provides enhanced functionality with compatible Apple devices. See chart below for complete compatibility.
1/4” STEREO ADAPTER BATTERY INSTALLATION BATTERY LIFE & REPLACEMENT BATTERY While it will vary by usage, battery life will average around 45 hours. The power indicator light will begin flashing when there is approximately 10% battery life remaining.
NOISE CANCELLING OFF ON Audio source with noise cancelling To use the headphone with noise cancelling, connect the headphone to an audio source and move the power switch forward to the on position. The power indicator will illuminate red when noise cancelling is powered on. Audio Source without noise cancelling Klipsch Mode headphones have the ability to function without noise cancelling turned on.
REATTACHING EARCUPS STORING THE HEADPHONES
USING WITH IN-FLIGHT ENTERTAINMENT SYSTEMS Audio jack configurations on airplanes vary. Note jack configurations in the chart below: A single, 3.5 mm jack No adapter needed. One 3.5 mm jack and one power jack Use the single plug in the 3.5 mm jack. The power jack does not need a connection. Two 3.5 mm jacks Use the included airline adapter One power jack and two 3.5 mm jacks Use the included airline adapter for the two 3.5 mm jacks. The power jack does not need a connection.
TROUBLESHOOTING Low or no volume Check that audio source is powered on and that the volume is turned up. Check that the audio cable is properly connected and not damaged. The headphones will not work if the power is switched on and the battery is fully discharged. Replace AAA battery or use with power switch in the off position. No noise cancelling Check that power switch is in on (forward) position. Replace AAA battery.
3502 WOODVIEW TRACE, INDIANAPOLIS, IN, USA klipsch.com ©2011, Klipsch Group, Inc.
