Specification Sheet

PRO-200A
MULTI-PURPOSE AMPLIFIER
• POWER OUTPUT, rated at 2x100 Watts (stereo) into 4 Ohm
• HIGH POWER OUTPUT (bridged mode), rated at 200 Watts into 8 Ohm
• SUBWOOFER AMPLIFIER, adjustable crossover frequency 50 Hz – 150 Hz
• FULL RANGE AMPLIFIER to power a full stereo 2.1 or 2.0 system
• DAISY CHAIN CAPABILITY for larger installs and theater systems
• EXTENSIVE HEAT SINKS for reliable operation and long life of the amplifier
• HIGH CURRENT DISCRETE POWER TRANSISTORS in the output stage for
the best possible performance
• AUTOMATIC POWER TURN “ON” for maximum energy efficiency
• FRONT MOUNTED LEVEL CONTROL for easy setup and adjustability
• GOLD PLATED RCA input and output jacks
• HEAVY DUTY push button binding posts for easy connection
• OVERLOAD PROTECTION for long lasting, high performance audio
SPECIFICATIONS
RATED POWER OUTPUT
2 x 100 Watts (Stereo) into 4 ohm Load
200 Watts (BTL) into 8 ohm Load
TOTAL HARMONIC DISTORTION (THD) <0.1%
SIGNAL-TO-NOISE RATIO >100dB
CROSSOVER FREQ. RESPONSE
@ Min position 18.5-55.2Hz 40Hz/0dB ref
@ Max position 18.2-168.8Hz 40Hz/0dB ref
AUTO TURN ON SENSITIVITY
5mV +/-2mV Full Range 1KHz
5mV +/-2mV Input 50 Hz
DELAY ”OFF“ TIME 8 minutes
LINE OUT FREQ. RESPONSE 20Hz +/-5K - 20 KHz +/-5K 1KHz/0dB ref
INPUT IMPEDANCE LINE IN 9.2K ohm +/-5%
MAX. NOISE+HUM VOL MAX <1.0mV, Input Shorted
POWER REQUIREMENT
115V 60Hz or
220 - 240V 50Hz
DIMENSIONS 5.5” (140mm) H 5.69” (145mm) W 12.75” (324mm) D
CLEARANCE FOR VENTILATION Top: Min. 0.375” (10mm) | Back: Min. 2” (50mm)
WEIGHT 11 lbs (5.3 kg)
3502 WOODVIEW TRACE INDIANAPOLIS, IN 46268 | KLIPSCH.COM
All specifications are subject to change without notice. ©2015 Klipsch Group, Inc. Klipsch, Keepers of the Sound and Tractrix are registered
trademarks of Klipsch Group, Inc. reigisted in the US and other countries. A wholly-owned subsidiary of Voxx International Corporation
SEAMLESS HIGH PERFORMANCE
The Klipsch Professional Series introduces a new line of high-performance
architectural speakers unlike any you’ve heard before. The PRO-200A utilizes
premium circuit and amp design to serve at the perfect unit to power the entire
Klipsch Professional Series.