Specifications

FREQUENCY RESPONSE Conforms to Dolby Atmos Specications
SENSITIVITY Conforms to Dolby Atmos Specications
POWER HANDLING (CONT/PEAK) 75W / 300W
NOMINAL IMPEDANCE 8 Ohms Compatible
CROSSOVER FREQUENCY 2kHz
HIGH FREQUENCY DRIVER 1” Titanium LTS Tweeter with Hybrid Tractrix Horn
LOW FREQUENCY DRIVER 6.5” Cerametallic Cone Woofer
ENCLOSURE MATERIAL MDF
ENCLOSURE TYPE Acoustic Suspension
INPUTS Single Binding Posts
FREQUENCY RESPONSE 32-25kHz +/- 3dB
SENSITIVITY 98dB @ 2.83V / 1m
POWER HANDLING (CONT/PEAK) 150W / 600W
NOMINAL IMPEDANCE 8 Ohms Compatible
CROSSOVER FREQUENCY 1750Hz
HIGH FREQUENCY DRIVER 1” Titanium LTS Vented Tweeter with Hybrid Cross-Section
Tractrix
®
Horn
LOW FREQUENCY DRIVER Dual 8” Cerametallic Cone Woofers
ENCLOSURE MATERIAL MDF
ENCLOSURE TYPE Bass Reex via rear-ring Tractrix
®
Port
INPUTS Dual Binding Posts
HEIGHT 43.12” (109.5 cm)
WIDTH 10.90” (27.7 cm)
DEPTH 19.80” (50.3 cm)
WEIGHT 71 lb (32.2 kg)
FINISH Ebony, Walnut, Piano Black
BUILT FROM 2018
RP-8060FA
RP-8060FA SPEC SHEET | V01 | 180703
All specications are subject to change without notice. ©2018 Klipsch Group, Inc. Klipsch and Tractrix are registered trademarks of Klipsch Group, Inc. A wholly-owned subsidiary of Voxx International Corporation.
3502 WOODVIEW TRACE INDIANAPOLIS, IN 46268 | KLIPSCH.COM
1
OF 2
SPECIFICATIONS - MAIN CHANNEL
SPECIFICATIONS - HEIGHT CHANNEL