8900 Keystone Crossing, Suite 1220 Indianapolis, Indiana 46240 1. 800 . KLIPSCH • www.klipsch.com Make sure you return your warranty card so that we may keep you up-to-date on new Klipsch products and promotions. As always, if you have any questions, contact your local authorized Klipsch dealer.
SP-1, SF-2, SF-1, SB-3, SB-2, SC-1, & SS-1 LOUDSPEAKERS Owner’s Manual & Warranty
CAUTION: RISK OF ELECTRIC SHOCK! DO NOT OPEN! ! CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back plate of this device. There are no user-serviceable parts inside. Refer repairs to a Klipsch authorized service center. AVIS: Risque de choc electricque, ne pas ouvrir. ! CAUTION! The international symbol of a lightning bolt inside a triangle is intended to caution you to uninsulated “dangerous voltage” within the device’s enclosure.
SS-1 Wall Mount Hole Marking Template 4 9/16" Cut along dotted line and mail. IF YOU PREFER, YOU CAN REGISTER ONLINE AT WWW.KLIPSCH.COM For multiple speaker purchases, please fill out only one warranty card. Name: Street Address: City/State/Zip: Home Phone: Work Phone: E-mail Address: Would you like to receive the latest product updates and news via e-mail? q Yes q No Product Purchase Model and serial number must be included to honor your warranty card.
Klipsch Limited Warranty KLIPSCH, L.L.C. (“KLIPSCH”) warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below). For a period of five (5) years from the date of purchase, KLIPSCH will repair or replace (at KLIPSCH’s option) this product or any defective parts (excluding electronics and amplifiers) in this product. For products that have electronics or amplifiers, the warranty on those parts is for a period of two (2) years from the date of purchase.
15. Dangerous Entry. Care should be taken that no foreign objects or liquids fall or are spilled inside the device. 16. Damage Requiring Service. The device should be serviced by a Klipsch authorized service center when: -The plug or power supply cord has been damaged. -Objects have fallen or liquid spilled inside of the device. -The device has been exposed to moisture. -The device does not appear to be operating properly or exhibits a marked change in performance.
Dear Klipsch Synergy Series Owner: Congratulations on your purchase of Klipsch Synergy Series loudspeakers! These products represent the best new thinking, coupled with the Klipsch tradition of sonic excellence. The Synergy Series was developed using the latest in materials and technology to deliver extraordinary sound from today’s digital sources. Designed as a family, the Klipsch Synergy Series was developed to provide optimal performance in either a home theater or music system.
Component Specifications SB-2 Sensitivity: 93dB @ 1 watt / 1 meter Bandwidth: 54Hz–20kHz±3dB Nominal Impedance: 8 ohms Crossover Frequency: 2400Hz Power Handling: 85 watts maximum continuous (340 watts peak) Enclosure Type: Bass reflex via wide flare, rear-firing por t Drive Components: Two-way system using one 1" (2.54cm) K-101-S neodymium magnet, aluminum dome compression driver with a 90° x 60° Tractrix Horn and one 6.5" (16.
Wall Mounting • Install the four rubber stick-on bumpers (one on each corner of the rear panel of the speaker) to provide clearance for the speaker wire between the wall and cabinet. This will also prevent the speaker from marring the wall. • Cut out the template on the back cover of the owner’s manual to assist in obtaining proper spacing of the two mounting holes. If the template is not available, space the mounting screws 4 9/16" apart on a vertical line.
Connect the SC-1 to the “Center” channel speaker output of your system’s power amplifier. Connect the SS-1 to the “Rear” or “Surround” channel speaker outputs of your system’s power amplifier. When connecting surround speakers to the rear channels of a 5.1 channel system, it is important that they are hooked up to the appropriate left and right rear channels as the surround effects are in stereo.
Troubleshooting • If one or both SP-1 subwoofers have little or no output: — Double check your power (AC) and system connections. — Make sure that the power switch on the rear control panels of both units is set to the “ON” or “AUTO” position. ! — Check that the power light on the front of the SP-1 is lit. If not, check the AC fuse. When changing the AC main’s power fuse, unplug the power cord first. To access the fuse, use the appropriate screwdriver to unscrew the cap on the fuse receptacle.
Klipsch Synergy Series Technology The Klipsch Synergy Series is a complete, matched family of high performance loudspeakers that offers superior home theater and two-channel performance. This series offers a choice of two bookshelf speakers, the SB-2 and SB-3, and three floorstanding main channel speakers—the SF-1 and SF-2 and a model with a built-in powered subwoofer, the SP-1. The voice-matched companion SC-1 center speaker and SS-1 surround speakers complete the family.
