Operation Manual

Component Specifications
SB-2
Sensitivity: 93dB @ 1 watt / 1 meter
Bandwidth: 54Hz–20kHz±3dB
Nominal Impedance: 8 ohms
Crossover Frequency: 2400Hz
Power Handling: 85 watts maximum continuous
(340 watts peak)
Enclosure Type:Bass reflex via wide flare, rear-firing port
Drive Components: Two-way system using one 1" (2.54cm)
K-101-S neodymium magnet, aluminum dome compres-
sion driver with a 90° x 60° Tractrix Horn and one
6.5" (16.51cm) K-1092-SB magnetically shielded
woofer featuring a polymer housing and IMG cone
Net Weight: 13 lbs. (5.9kg)
Height: 15" (38.1cm)
Width: 7.3" (18.5cm)
Depth: 9.75" (24.7cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Woodgrain vinyl veneer
SB-3
Sensitivity: 94dB @ 1 watt / 1 meter
Bandwidth: 52Hz–20kHz±3dB
Nominal Impedance: 8 ohms
Crossover Frequency: 2700Hz
Power Handling: 100 watts maximum continuous
(400 watts peak)
Enclosure Type:Bass reflex via wide flare, rear-firing port
Drive Components: Two-way system using one 1" (2.54cm)
K-101-S neodymium magnet, aluminum dome compres-
sion driver with a 90° x 60° Tractrix Horn and one
8" (20.3cm) K-1093-SB magnetically shielded
woofer featuring a polymer housing and IMG cone
Net Weight: 18 lbs. (8.18kg)
Height: 17" (43.18cm)
Width: 8.69" (22.06cm)
Depth: 11.25" (28.57cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Woodgrain vinyl veneer
SF-1
Sensitivity: 94dB @ 1 watt / 1 meter
Bandwidth: 40Hz–20kHz±3dB
Nominal Impedance: 8 ohms
Crossover Frequency: 2kHz
Power Handling: 100 watts maximum continuous
(400 watts peak)
Enclosure Type:Bass reflex via wide flare, rear-firing port
Drive Components: Two-way system using one 1" (2.54cm)
K-101-S neodymium magnet, aluminum dome compres-
sion driver with a 90° x 60° Tractrix Horn and one
6.5" (16.51cm) K-1075-SB magnetically shielded
woofer featuring a polymer housing and IMG cone
Net Weight: 33 lbs. (15kg)
Height: 33" (83.82cm)
Width: 8" (20.32cm)
Depth: 13.6" (34.54cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Woodgrain vinyl veneer
SF-2
Sensitivity: 96dB @ 1 watt / 1 meter
Bandwidth: 35Hz–20kHz±3dB
Nominal Impedance: 8 ohms
Crossover Frequency: 2.8kHz
Power Handling: 100 watts maximum continuous
(400 watts peak)
Enclosure Type:Bass reflex via wide flare, rear-firing port
Drive Components: Two-way system using one 1" (2.54cm)
K-101-S neodymium magnet, aluminum dome compres-
sion driver with a 90° x 60° Tractrix Horn and two
6.5" (16.51cm) K-1078-SB magnetically shielded
woofers featuring a polymer housings and IMG cones
Net Weight: 38 lbs. (17.3kg)
Height: 35" (88.9cm)
Width: 8" (20.32cm)
Depth: 13.6" (34.54cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Woodgrain vinyl veneer
SP-1
Sensitivity: 94dB @ 1 watt / 1 meter
Bandwidth: 30Hz–20kHz±3dB
Nominal Impedance: 8 ohms
Crossover Frequencies: 2.3kHz and 125Hz
Power Handling: 100 watts maximum continuous
(400 watts peak)
Enclosure Type, Tweeter and Mid Bass: Sealed
Enclosure Type, Subwoofer: Bass reflex via wide flare,
rear-firing port
Drive Components: Three-way system using one 1" (2.54cm)
K-101-S neodymium magnet, aluminum dome compres-
sion driver with a 90° x 60° Tractrix Horn, one 5.25"
(13.33cm) K-1076-SV magnetically shielded mid-bass
woofer featuring a polymer housing and IMG cone and
one 8"(20.32cm) K-1077-SB magnetically shielded
woofer featuring a polymer housing
Subwoofer Amplifier: Class A/B MOSFET–225 watts
FTC-rated power: 55 watts, 4 ohms, 22-125Hz @ 1%
THD maximum
Auto Power: 2 second ON delay, 15 minute OFF delay
Inputs: High level speaker terminals via five-way binding
posts, 1) Line level dedicated LFE input via RCA phono
jack (non-filtered)
Outputs: 1) Line level LFE output via RCA phono jacks
(pass through from LFE input)
Net Weight: 47 lbs. (21.36kg)
Height: 37" (93.98cm)
Width: 9" (22.86cm)
Depth: 14" (35.56cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Woodgrain vinyl veneer
Voltage: 110/120VAC 60Hz
Export version: 230VAC 50/60Hz
SC-1
Sensitivity: 95dB @ 1 watt / 1 meter
Bandwidth: 60Hz–20kHz±3dB
Nominal Impedance: 8 ohms
Crossover Frequency: 2.2kHz
Power Handling: 100 watts maximum continuous
(400 watts peak)
Enclosure Type: Sealed
Drive Components: Two-way system using one 1" (2.54cm)
K-101-S neodymium magnet, aluminum dome compres-
sion driver with a 90° x 60° Tractrix Horn and two
5.25" (13.3cm) K-1079-SV magnetically shielded
woofers featuring polymer housings and IMG cones
Net Weight: 15 lbs. (6.78kg)
Height: 6.5" (16.5cm)
Width: 18" (45.72cm)
Depth: 7.5" (19.1cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Black matte vinyl
SS-1
Sensitivity: 94dB @ 1 watt / 1 meter (equivalent sound energy)
Bandwidth: 60Hz–20kHz±3dB
Nominal Impedance: 8 ohms
Crossover Frequency: 2kHz
Power Handling: 100 watts maximum continuous
(400 watts peak)
Enclosure Type:Sealed
Drive Components: Two-way system using two 1" (2.54cm)
K-101-S neodymium magnet, aluminum dome compres-
sion drivers with 90° x 60° Tractrix Horns and one
5.25" (13.3cm) K-1076-S woofer featuring a polymer
housing and IMG cone
Net Weight: 8.5 lbs. (3.9kg)
Height: 6.75" (17.15cm)
Width: 15" (38.1cm)
Depth: 6" (15.24cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Black or white
CE
This product complies with the essential requirements of EMC direc-
tives 89/336/EEC and 73/23/EEC (inclusive of 93/68/EEC) and carries
the CE mark accordingly.