SUBWOOFER
IMPORTANT SAFETY INSTRUCTIONS 1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. Conventional Speaker Wire Connections – Using 16-gauge or larger speaker wire, connect the RED “positive” (+) terminal of your amplifier’s LEFT channel to the RED (+) terminal of your subwoofer’s LEFT channel input (“HIGH LEVEL IN”).
1-800-KLIPSCH to confirm that you have an unaltered serial number and/or you purchased from a KLIPSCH authorized dealer. This Warranty is only valid for the original purchaser and will automatically terminate prior to expiration if this product is sold or otherwise transferred to another party. This Warranty does not cover cosmetic damage or damage due to misuse, abuse, negligence, acts of God, accident, commercial use or modification of, or to any part of, the product.
FIGURE 3 LOW LEVEL CONNECTIONS LFE Output on Processor/ Pre-Amp/Receiver connected to LFE input on subwoofer amplifier [OR] Left & Right pre-outs on Processor/Pre-Amp/Receiver connected to Left & Right line inputs on subwoofer amplifier FIGURE 4 HIGH LEVEL CONNECTIONS Main speaker outputs on receiver connected to high level inputs on subwoofer amplifier (Right is shown, repeat for Left) 3502 Woodview Trace, Suite 200 Indianapolis, Indiana 46268 USA . 1 800 . KLIPSCH • www.klipsch.
