Specifications

WA-2
SPECIFICATIONS WA-2
Frequency of Operation 2.4GHz ISM band
Channel Selection Automatic
Signal Range 50' (15m)
Frequency Response
15 -150 Hz +0/-3 dB
All specifications are subject to change without notice. ©2011 Klipsch Group, Inc.
3502 Woodview Trace Indianapolis, IN 46268 | klipsch.com
A COMPLETE SOLUTION
The WA-2 Wireless Subwoofer kit comes with everything you need to
wirelessly send bass and/or low frequency effects information from
your home theater receiver/processor or stereo receiver* to a
compatible Klipsch Group, Inc. (KGI) subwoofer equipped with
a WA Port.
Current KGI subwoofers with a WA Port include:
Klipsch SW-110, SW-112, SW-308, SW-310, SW-311
Energy ESW-M6, ESW-M8, Mirage MM-6, MM-8
Jamo Sub 800
NO MORE LONG, BULKY SUBWOOFER CABLES
The WA-2 wireless subwoofer kit makes adding a subwoofer to a new
or existing speaker system much easier. It replaces the need for a
long, thick, costly subwoofer cable that traditionally must be
connected between a receiver or processor and a subwoofer.
IT ALLOWS FOR BEST SUBWOOFER PLACEMENT
Easily place the subwoofer where it both sounds and looks best in
the room since you’re not restricted by a speaker cable. Up to 4
WA-2’s can be used simultaneously in an average size household
2.4 GHz OPERATION WITH DYNAMIC CHANNEL SELECTION
The wireless signal transmits flawlessly within a 50’ (15m) radius
using an advanced automatic channel selection technology. Even if
you have a wireless network or wireless phone system, the WA-2
wireless subwoofer kit does not interfere with, nor has interference
from, any other wireless systems in your home.
NO MANUAL “PAIRING” REQUIRED
Unlike other designs that require a manual “pairing” step, the WA-2
wireless subwoofer kit’s transmitter finds the receiver automatically
once you connect it and turn it on the first time.
GAIN CONTROL ALLOWS OPERATION WITH MANY
DIFFERENT RECEIVERS
The transmitter’s input gain control compensates for varying output
levels of different receivers/processors, allowing maximum perfor-
mance in any system.
*Stereo receiver must have line level outputs for right and left channels to
attach to the WA-2 transmitter.
WIRELESS SUBWOOFER KIT