User Guide

Thank you for purchasing the manual projection screen from KlipXtreme
®
. Ideal for home
theater applications and business presentations, this durable projection screen can be mounted
on the wall or ceiling. Please follow the instructions below for proper operation and care of the
product.
We invite you to visit us at www.klipxtreme.com for support and to find out more about our
full line of projection screens and other new and exciting products.
The screen must be installed on a flat, level position.
The ceiling or wall structure must be capable of supporting at least five times the weight of the
projection screen. Otherwise, the structure must be reinforced.
The screen should be securely mounted to avoid vibration and to withstand daily use.
Before sliding the screen back to the case, make sure its surface is completely clean.
Refrain from hanging anything on the screen as it may cause the screen to fall.
I. Introduction
1.
2.
3.
4.
5.
6.
7.
8.
Case
White matte fabric
Metal hooks
Integrated wall mount bracket
End cap
Slat rod
Pull down handle
Set of 4 screws and anchors
II. Product overview III. Installation
English
Warnings
1.
2.
3.
4.
5.
Carefully unpack screen from carton box. Remove any protective foam or tape from case
before operation.
DO NOT use a knife or sharp object to cut tape or nylon, to avoid damaging the screen.
The screen comes with metal hooks and integrated mount brackets. Use the metal rings atta-
ched to hang the screen from the ceiling, and the integrated brackets if you prefer to install the
screen on the wall, as illustrated below:
1.
2.
Measure distance on the wall or ceiling, and mark the mounting spots.
Drill the holes, and insert the proper anchors or expansion screws to secure the mount firmly
onto the surface.
Depending on the configuration chosen, carefully hang the screen from the metal hooks or
fasten the screws firmly to the wall at both ends of the case.
3.
4.
5.
Wall installation Ceiling installation
1
3
2
4
5
6
7
8