2-Tier Welding Cart with Locking Cabinet Owner’s Manual WARNING: Read and understand all instructions, warnings, and cautions before using this product. Failure to follow the instructions, warnings, and cautions may result in serious personal injury and/or property damage.
Thank you very much for choosing a Klutch product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. This product is designed for certain applications only. The distributor cannot be responsible for issues arising from modification or use of this product in an application for which it was not designed.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 5 Assembly Instructions .............................
Intended Use The KLUTCH Three-Tier Cabinet cart provides an integrated all-in-one solution for portable welder or plasma cutting applications. It is designed for the welder or plasma cutter to sit on top of the cart. The middle shelf allows a second unit to be added to this cart. The locking bottom cabinet provides secure storage for your valuable welding tools.
Important Safety Information GENERAL SAFETY The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. Exercise common sense and caution when using this tool. Always be aware of the environment and ensure that the tool is used in a safe and responsible manner. DO NOT allow persons to assemble or operate this product until they have read this manual and have developed a thorough understanding of how the product works.
WELDING CART USE AND CARE Store the Welding Cart out of reach of children and other untrained persons. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one product may become hazardous when used on another product. Maintain labels and nameplates on the Welding Cart. Maintain a safe working environment. Make sure there is adequate surrounding workspace. DO NOT use this product in a damp or wet location.
Assembly Instructions Refer to the following illustration and the Parts Diagram during assembly. Top Shelf Cable Wraps Middle Shelf Locking Cabinet Door Wheel Caster 1. Place the base panel on a sturdy surface with the side lips facing up. Find the long slots at the back of the base unit. Insert the Axle Clips into the slots from the top, then slide the axle through the large hole in the clip. Repeat for both clips. 2. Slide a wheel on each side. 3. Secure each wheel with a flat washer and cotter pin.
7. Using the supplied Philips head bolt, slide on a flat washer and insert it into the pre-drilled holes in the right side of the plastic door hinge. Then insert this assembly into the pre-drilled holes in the front of the cabinet. Add a flat washer, lock washer, and nut onto the back to secure. Repeat for the other right side hole in that hinge. Then repeat for the other hinge. 8.
Maintenance Maintain your Welding Cart by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures: Regularly clean the outer surfaces with a clean cloth. DO NOT use harsh cleaners. Before each use, inspect the general condition of the Welding Cart. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, and any other condition that may affect its safe operation. DO NOT use damaged equipment.
Parts Diagram Page 10 of 14
Parts List 1 Reference # Part# 105100109 TOP SHELF Description 1 2 105100110 HANDLE 1 3 105100111 LEFT SIDE VERTICAL PANEL 1 4 105100112 CABLE WRAP 8 5 105100113 MIDDLE SHELF 1 6 105100114 LEFT SIDE CABINET PANEL 1 7 105100115 PLASTIC HINGE 2 8 125100008 DOOR 1 9 105100027 LOCK SET 1 10 105100026 DOOR HANDLE 1 11 105100116 PHILLIPS HEAD BOLT M5*16 8 11.1 105100046 FLAT WASHER M5 16 11.2 105100045 LOCK WASHER M5 8 11.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following will be required: Model Number, Serial Number/Lot Date Code, and Description.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Klutch product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by Northern Tool and Equipment Company, Inc. Burnsville, Minnesota 55306 NorthernTool.
