Product Manual

2
WHY USE A FILTER REGULATOR COMBINATION?
The air being supplied to the equipment may contain moisture,
dust , dirt or other foreign particles which can damage the
equipment. To prevent this damage, an Air Filter is recommended.
Air Regulators ensures that the compressed air stays within a
specified pressure range. Pneumatic equipment that is operated
at a higher than recommended pressure level wastes the energy
which generates that pressure. Creates a potential safety hazard,
SPECIFICATIONS
**Inlet Pressure 105 PSI (7 BAR),Set Pressure 90 PSI (6BAR). Pressure Drop 17 PSI (1 Bar)
Description
Port
Size
Flow Rate (Max)** Pressure Gauge Bowl Size Bowl Capacity (Max) Height (h) Width (w)
Cfm Lpm Port Size Oz. ml Oz. ml in mm in mm
Miniature 1/8" 14 400 1/8” 1.3 37 0.3 9 6.69 170 1.57 40
Miniature 1/4" 20 550 1/8” 1.3 37 0.3 9 6.69 170 1.57 40
Intermediate 1/4" 63 1800 1/8” 2.9 83 1.08 32 8.66 220 2.17 55
Intermediate 3/8" 77 2200 1/8” 2.9 83 1.08 32 8.66 220 2.17 55
Standard 1/2" 106 3000 1/8” 6.5 185 1.5 44 11.02 280 2.76 70
FILTER & REGULATOR COMBINATION ACCESSORIES
Description
Port
Size
Accessories Part #
Mounting
Clamp
Mechanical Pressure Gauge Digital Pressure Gauge
External Auto
Drain
BSPT NPT BSPT NPT
Miniature 1/8" A2C01 A2G02 A2G05 DPG/L/1-8/B DPG/L/1-8/N A2D01
Miniature 1/4" A2C01 A2G02 A2G05 DPG/L/1-8/B DPG/L/1-8/N A2D01
Intermediate 1/4" A2C02 A2G02 A2G05 DPG/L/1-8/B DPG/L/1-8/N A2D02
Intermediate 3/8" A2C02 A2G02 A2G05 DPG/L/1-8/B DPG/L/1-8/N A2D02
Standard 1/2" A2C03 A2G02 A2G05 DPG/L/1-8/B DPG/L/1-8/N A2D03
and will probably wear out prematurely. Operating below specified
pressure levels can cause the machine to fail to meet design
performance specifications.
Precise air pressure control is essential for efficient operation of
air-powered equipment.
The Filter-Regulator combo offers the above in a space saving
design.
GENERAL SELECTION GUIDE FOR CHOOSING THE CORRECT FILTER & REGULATOR COMBINATION
BASED ON COMPRESSOR SIZE
Compressor
Filter & Regulator Combination
HP CFM
1HP Upto 4 CFM Miniature 1/8” or 1/4”
2 HP Upto 9 CFM Miniature 1/8” or 1/4”
3 HP Upto 13 CFM Miniature 1/4”
5 HP Upto 22 CFM Miniature 1/4”, Intermediate 1/4”
7.5 HP Upto 33 CFM Intermediate 1/4”
10 HP Upto 45 CFM Intermediate 1/4” or 3/8”
15 HP Upto 67 CFM Intermediate 3/8”, Standard 1/2”
20 HP Upto 90 CFM Standard 1/2”
25 HP Upto 112 CFM Standard 1/2”