Product Manual

ManualsBrandsKlutch ManualsDrill Press VisesCross Slide Drill Press Vise — 4in. Jaw Length

Thank you very much for choosing a Klutch product. For future reference, please complete the

owner’s record below:

Serial Number/Lot Date Code: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire manual

to become familiar with this product before you begin using it.

This 4" Cross Slide Drill Press Vise is designed for certain applications only. The distributor

cannot be responsible for issues arising from modification or use of this product in an

application for which it was not designed. We strongly recommend that this product not be

modified and/or used for any application other than that for which it was designed.

For technical questions please call 1-800-222-5381.

Table of Contents

Intended Use.......................................................................................................................................1

Technical Specifications....................................................................................................................1

Important Safety Information..............................................................................................................1

Specific Operation Warnings..............................................................................................................3

Assembly.............................................................................................................................................3

Operating Instructions........................................................................................................................3

Maintenance.....................................................................................................................................3

Parts Diagram.....................................................................................................................................4

Parts List ............................................................................................................................................4

Troubleshooting..................................................................................................................................5

Replacement Parts.............................................................................................................................5

Limited Warranty.................................................................................................................................5

Intended Use

This heavy-duty cast iron cross slide vise has replaceable serrated 4in. jaws that open to 3 in.

wide. Two swivel crank handles adjust both forward and sideways for versatile clamping and

precise drilling capabilities. Set screws hold positioning tightly for drilling. Longitudinal

movement of 3 5/8 in. with cross travel of 3 5/8 in. Vise is secured to drill press by 3 slots on 2

sides and 1 slot on one end.

Technical Specifications

Important Safety Information

WARNING:

• Read and understand all instructions. Failure to follow all instructions may result in serious

injury or property damage.

• The warnings, cautions, and instructions in this manual cannot cover all possible conditions

or situations that could occur. Exercise common sense and caution when using this tool.

Always be aware of the environment and ensure that the tool is used in a safe and

responsible manner.

• Do not allow persons to operate or assemble the product until they have read this manual

and have developed a thorough understanding of how it works.

4" Cross Slide Drill Press Vise

OWNER’S MANUAL

4" Cross Slide Drill Press Vise

OWNER’S MANUAL

Item#s 49462

1 of 5

WARNING:

Read carefully and understand all ASSEMBLY AND OPERATION

INSTRUCTIONS before operating. Failure to follow the safety rules and

other basic safety precautions may result in serious personal injury.

Property

Jaw Capacity

Jaw Length

Material

Handles (qty.)

Longitudinal Travel

Specification

3 in.

4 in.

Heavy-duty cast iron

3 5/8 in.

Summary of content (4 pages)

PAGE 1
4" Cross Slide Drill Press Vise OWNER’S MANUAL 4" Cross Slide Drill Press Vise OWNER’S MANUAL Thank you very much for choosing a Klutch product. For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.
PAGE 2
4" Cross Slide Drill Press Vise OWNER’S MANUAL • Do not modify this product in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the product was designed. • Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger industrial equipment. There are certain applications for which this equipment was designed.
PAGE 3
4" Cross Slide Drill Press Vise OWNER’S MANUAL Parts Diagram 4" Cross Slide Drill Press Vise OWNER’S MANUAL Troubleshooting Crushing and Marring: Overtightening, using incorrect or dirty jaws can damage the work piece. Before clamping anything in this Vise, assure the Vise is clean and in working order. If the work piece is softer than the jaws, use shims or a softer material between the work piece and the jaws to prevent damage to the work piece.
PAGE 4
" Cross Slide Drill Press Vise OWNER’S MANUAL Assumption of Risk You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the product instructions is at Your own risk. Governing Law This limited warranty gives You specific legal rights, and You also may have other rights which vary from state to state.