LOW NOISE 3/8in. 90° ANGLE AIR DRILL OWNER’S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Klutch™ product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only. The distributor cannot be responsible for issues arising from modification.
SAVE THESE INSTRUCTIONS WORK AREA · Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents. · Do not use your Air Drill where there is a risk of causing a fire or an explosion; e.g. in the presence of flammable liquids, gasses, or dust. An Air Drill can create sparks, which may ignite the dust or fumes. · Keep children and bystanders away while operating the Air Drill.
· Disconnect air supply from tool and place the switch in the locked or off position before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. · Secure work with clamps or a vise instead of your hand to hold work when practical. This safety precaution allows for proper tool operation using both hands. · Store idle tools.
damage and/or personal injury. 1. Make sure that the air valve (or trigger) is in the “off” position before connecting to the air supply. 2. An air pressure of 90 PSI is required. 3. Drain the air tank daily. Water in the airline can damage the tool. 4. Clean the air inlet filter weekly. 5. Line pressure should be increased to compensate for longer air hoses (over 26 feet or 8 meters). The hose diameter should be 3/8in. I.D. 6. Keep the hose away from heat, oil and sharp edges.
DIAGRAM & PARTS LIST NO PART NO DESCRIPTION QTY NO PARTS NO DESCRIPTION QTY 08 OB-04 O-RING (3.5*1.4) 1 34 22534 BEVEL GEAR (15T) 1 09 70009 AIR INLET 1 35 ST22535 ANGLE HOUSING 1 10 ST20010 EXHAUST 1 36 22536A BALL BEARING (626) 1 11 70011 O-RING (26.7*1.
27 70027 IDLER GEAR (16T) 2 52 OB-02 O-RING (P9) 28 70028 IDLER GEAR PIN 2 53 ST288303 O-RING (P10) 1 29 70029 IDLER GEAR PLATE 1 54 OB-30 1 30 ST165032 CLAMP NUT 1 55 ST200A33 VALVE STEM 1 31 22531 BEARING BUSHING 1 56 ST200A43 SPRING 1 32 70048A BEARING (6000ZZ) 2 57 ST200A44 VALVE 1 33 OB-31 BEARING (6001Z) 2 58 ST200A45 WASHER 1 SNAP RING 1 For replacement parts and technical questions, please call 1-800-222-5381.