Product Manual

ManualsBrandsKlutch ManualsMetal FabricationPneumatic Planishing Hammer — 19 5/8in. Throat Capacity

Thank you very much for choosing a Klutch product. For future reference, please complete the

owner’s record below:

Serial Number/Lot Date Code: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire manual

to become familiar with this product before you begin using it.

Thispneumatic planishing hammer is designed for certain applications only. Northern Tool and

Equipment cannot be responsible for issues arising from modification or use of this product in

an application for which it was not designed. We strongly recommend that this product not be

modified and/or used for any application other than that for which it was designed.

For technical questions please call 1-800-222-5381.

Table of Contents

Intended Use ----------------------------------------------------------------------------------------------- 1

Technical Specifications ---------------------------------------------------------------------------------- 1

Important Safety Information ----------------------------------------------------------------------------- 2

Specific Operation Warnings ----------------------------------------------------------------------------- 3

Assembly --------------------------------------------------------------------------------------------------- 3

Before Each Use ------------------------------------------------------------------------------------------- 5

Operating Instructions ------------------------------------------------------------------------------------ 5

After Each Use --------------------------------------------------------------------------------------------- 6

Maintenance ----------------------------------------------------------------------------------------------- 6

Parts Diagram ---------------------------------------------------------------------------------------------- 7

Parts List --------------------------------------------------------------------------------------------------- 8

Troubleshooting ------------------------------------------------------------------------------------------- 8

Replacement Parts ---------------------------------------------------------------------------------------- 8

Limited Warranty ------------------------------------------------------------------------------------------- 9

Intended Use

The planishinghammer is used in metal fabrication and restoration to smooth large areas of metal,

welds and gentle panel crowning.

Technical Specifications

PNEUMATIC PLANISHING HAMMER

OWNER’S MANUAL

PNEUMATIC PLANISHING HAMMER

OWNER’S MANUAL

Item# 49718

1 of 9

WARNING:

Read carefully and understand all ASSEMBLY AND OPERATION

INSTRUCTIONS before operating. Failure to follow the safety rules and

other basic safety precautions may result in serious personal injury.

Property

Speed

Operating Air Pressure

Air Inlet

Overall Dimensions

Anvil-to-HammerOpening

Anvil Height

Adjustment

Anvil Sizes

Throat Depth

Foot Pedal

Specification

875 - 1350 BPM

50 to 100 (maximum) PSI; 4 SCFM

1/4", 18 NPT, female

23"(L) x 5-1/2"(W) x 24"(H) (C-frame and Hammer)

4 inches (maximum)

2-position anvil shaft mount with lock pin

3/8" to 1-1/4" opening (between head and anvil);4-position,

stepped anvil micro-adjustment block 1/16" height difference

between each level.

1" Radius, 2" Radius and 3" Radius

19-5/8"

7-1/4"(L) x 4"(W) x 3-1/2"(H) inches. Built-in air filter

Summary of content (5 pages)

PAGE 1
PNEUMATIC PLANISHING HAMMER OWNER’S MANUAL PNEUMATIC PLANISHING HAMMER OWNER’S MANUAL Thank you very much for choosing a Klutch product. For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.
PAGE 2
PNEUMATIC PLANISHING HAMMER OWNER’S MANUAL Important Safety Information PNEUMATIC PLANISHING HAMMER OWNER’S MANUAL CAUTION: WARNING: • Read and understand all instructions. Failure to follow all instructions may result in serious injury. •The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. Exercise common sense and caution when using this tool.
PAGE 3
PNEUMATIC PLANISHING HAMMER OWNER’S MANUAL Mounting the “C” Frame 1. Select a workbench in the shop area able to support the weight of the Planishing Hammer, themetal being worked on, and the vibration of the planishing process. The “C” Frame should be positioned so that the mounted Air Hammer (10) is extended slightly over the edge of the workbench. This will accommodate various shapes of metals being planished. 2.
PAGE 4
PNEUMATIC PLANISHING HAMMER OWNER’S MANUAL After Each Use PNEUMATIC PLANISHING HAMMER OWNER’S MANUAL Parts Diagram CAUTION: • Disconnect the air supply from the tool and place the switch in the locked or off. Maintenance Maintain your tool. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair by adopting a program of conscientious repair and maintenance in accordance with the recommended procedures found in this manual.
PAGE 5
PNEUMATIC PLANISHING HAMMER OWNER’S MANUAL Parts List PNEUMATIC PLANISHING HAMMER OWNER’S MANUAL Limited Warranty Part No. Description Q’ty Part No.