Product Manual

Page 10 of 25
 Do not weld on the cylinder
 Always secure the cylinder upright to a cart or stationary object.
 Keep cylinders away from the welding or electrical circuits.
 Use the proper regulators, gas hose, and fittings for the specific application.
 Do not look into the valve when opening it.
 Use the protective cylinder cap whenever possible
⚠CAUTION
Proper Care, Maintenance, and Repair
 Always have power disconnected when working on internal components.
 Do not touch or handle the PC board without being properly grounded with a wrist strap. Put
the PC board in a static proof bag to move or ship.
 Do not put hands or fingers near moving parts like drive rolls of a fan
Specifications of Welder
Item
Specification
Power Supply
120V, 20A, 50/60 Hz, Single Phase
230V, 40A, 50/60 Hz, Single Phase
No-Load Voltage
78V DC
Output Range
15 to 75A DC with 120V Input Power
15 to 200A DC with 230V Input Power
Duty Cycle
100% @ 75A with 120V Input Power
15% @ 200A with 230V Input Power
Suggested Electrodes
E6013, E7014, E7018, Stainless Steel
Electrode Diameter
1/16 inch to 5/32 inch
Dimensions
17-3/4” x 9-5/8” x 15-1/2”
Weight
11-1/4 lb.