Operation Manual

14
INTERNAL SETTINGS (if required)
The correct measurement of FWD and SWR may be
affected if you connect an SWR meter at an intermediate
point on the antenna line.
Use these recommendations to adjust the Meters:
Output Power Meter reference 1000-watts REF <10 watts
SSB mode. Potentiometer (1) CCW +
SWR Meter Reference 1000-watt output power and SWR
2.0 SSB mode. Potentiometer (2) CCW +
For the Drain Current Meter:
Reference 35 Amps. Potentiometer (3) CCW +
1.
2.
3.