CUSTOMER SERVICE: Name: JCA Collective Phone Number: +61 423 259 751 Email: service@jcacollective.
0
Parts Description Qty 1 Mat 1 2 Pad 1 3 Eclosure Net 1 4 Top rail 8 NO.
NO.
STEP 1 Assemble the frame 1. Lay out the top rail (part 1), leg extension (part 2) and leg base (part 3) as pictured in the diagram. 2. Begin by assembling all the leg extensions with the leg base. Connect the leg extension to the base ensuring the locking pin locks into place 3. Once all the legs are assembled connect the top rails to the top of the leg extensions, once again ensuring the locking in locks in place. Be sure to connect the top rails to each other as you go. 4.
1 11 STEP 2 Assemble the Mat 1. Lay out the mat in the center of the assembled frame ensuring the top is facing upwards 2. Take the trampoline mat metal clips (part 12) and feed through the strap at the edge of thr trampoline mat. 3. Take the supplied spring hook tool and pull the strap back until the metal clip can hook over the top rail. Be sure to follow the order displayed in the diagrams above. 4. Continue until all the hooks are clipped over the top rail. 2 STEP 3 Assemble the Padding 1.
STEP 4 Assemb le the Net tubes 1. Place the Lower Net tube against the leg extension esuring they align vertically. There are 8 elastic straps on the pad,the lower pole need through the strap as the picture 1 show. 2. Take the supplied bolt and nuts and lining up the holes in the leg extension and the Lower Net Tube insert the screw through both poles. 3. Screw the nut onto the bolt and tighten to secure. 4. Repeat steps 2-3 for the second bolt and screw on each leg. 5. Repeat for all poles.
