Submittal Sheet

ManualsBrandsKMC Controls ManualsHeating SuppliesFlexStat, 6R3A, Hum (White)

Table Of Contents

Description and Application

The award-winning FlexStat is a controller and

sensor in a single, aractive package that creates a

exible solution to stand-alone control challenges or

BACnet network challenges. Temperature sensing is

standard with optional humidity, motion, and CO

sensing. Flexible input and output congurations and

built-in or custom programming ensure that a variety

of application needs can be met. Such applications

include single- and multi-stage packaged, unitary,

and split systems (including high SEER/EER variable

speed packaged equipment), as well as factory-pack-

aged and eld-applied economizers, water-source

and air-to-air heat pumps, fan coil units, central sta-

tion air handling units, and other similar applications.

In addition, an on-board library of programs permits

a single model to be rapidly congured for a wide

range of HVAC control applications. Thus, a single

“one size ts all” FlexStat model can replace multi-

ple competitor models. A single BAC-120163CW, for

example, can be quickly congured for any of these

application options:

◆ Air handling unit, with proportional heating and

cooling valves, and with optional economizer,

dehumidication, and/or fan status

◆ Fan coil unit, 2-pipe or 4-pipe, proportional or

2-position valves, with optional dehumidication

(w/ 4-pipe option) and/or fan status

Speciﬁcations and design subject to change without notice.

BAC-12xxxx/13xxxx/14xxxx Series

FlexStat

™

Features

Interface and Function

◆ User-friendly English-language menus (no

obscure numeric codes) on a 64 x 128 pixel,

dot-matrix LCD display with 5 buons for data

selection and entry

◆ Multiple display options include selectable

space temperature display precision, degrees

F/C toggle, rotation values, display blanking,

hospitality mode, and locked mode

◆ Built-in, factory-tested libraries of congurable

application control sequences

(Shown with

Optional

Motion and

Humidity

Sensors)

Contents

Description and Application ............................1

Features ............................................................1

Conﬁgurability .................................................2

Models .............................................................3

Application/Model Selection Guide .................4

Speciﬁcations, General ....................................5

Speciﬁcations, Motion Sensor ..........................5

Speciﬁcations, CO2 Models Only ....................6

Demand Control Ventilation (DCV) ..................7

Accessories ......................................................8

Dimensions and Connectors ............................9

Sample Installation ........................................... 9

Product and Documentation Awards ................ 9

Support ............................................................9

◆ Heat pump unit, with up to two compressor

stages, and with optional auxiliary heat, emer-

gency heat, dehumidication, and/or fan status

◆ Roof top unit, with up to two H/C stages, and

with optional economizer, dehumidication,

and/or fan status

FlexStats also provide the capability to custom-

ize the standard library of sequences using a KMC

programming tool (BACstage or TotalControl). This

enables a local authorized KMC installing contractor

to adapt the standard library to the unique site needs

and application-specic requirements of a particular

project.

BACnet over MS/TP communication is standard.

“E” versions, with an RJ-45 jack, add BACnet over

Ethernet, BACnet over IP, and BACnet over IP

as Foreign Device (for communication across the

Internet).

Summary of content (9 pages)

PAGE 1
BAC-12xxxx/13xxxx/14xxxx Series FlexStat™ Contents Description and Application.............................1 Features.............................................................1 Configurability..................................................2 Models..............................................................3 Application/Model Selection Guide..................4 Specifications, General.....................................5 Specifications, Motion Sensor...........................
PAGE 2
◆ ◆ ◆ Integral energy management control with optimum start, deadband heating and cooling setpoints, and other advanced features to assure comfort while maximizing energy savings ◆ Schedules can easily be set uniquely by the entire week (Mon.–Sun.), weekdays (Mon.–Fri.), weekend (Sat.–Sun.
PAGE 3
Models If your application is a: ◆ ◆ FCU (Fan Coil Unit) or Packaged Unit, AHU (Air Handling Unit), or RTU (Roof Top Unit)—see all models Model* Outputs** HPU (Heat Pump Unit)—see the BAC-1xxx63CW models only For more details, see Application/Model Selection Guide on page 4. See also the FlexStat Catalog Supplement and Selection Guide (SP-091)! Optional Sensors*** Typical Applications BAC-12xxxx models (e.g., BAC-120036CW) are standard and do not have a CO2 sensor. BAC-13xxxx/14xxxx models (e.g.
PAGE 4
Application/Model Selection Guide FlexStat Models BAC-1x0136CW (+ Humidity) BAC-1x1036CW (+ Motion) BAC-1x1136CW (+ Humidity/Motion) 3 Relays and 6 Analog Outputs BAC-1x0036CW BAC-1x1163CW (+ Humidity/Motion) BAC-1x1063CW (+ Motion) Applications and Options BAC-1x0163CW (+ Humidity) BAC-1x0063CW 6 Relays and 3 Analog Outputs ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Packaged Unit (Air Handling Unit and Roof Top Unit) 1 Heat and 1 Cool 1 or 2 Heat and 1 or 2 Cool (in BAC-1xxx63 RTU Menu Only) RTU RTU RTU RTU 1
PAGE 5
Temperature Sensor (with humidity sensor) Sensor Type CMOS Accuracy ±0.9° F (±0.5° C) offset from 40 to 104° F (4.4 to 40° C) Operating Range 36 to 120° F (2.2 to 48.8° C) Specifications, General Supply Voltage 24 VAC (+20%/–10%), Class 2 only 13 VA (not including relays) Supply Power Outputs (3/6 or 6/3) Binary outputs (NO, SPST, Form “A” relays) carry 1 A max. per relay or a total of 1.
PAGE 6
Specifications, CO2 Models Only Dimensions in Inches (mm) Dimensions 5.551 x 5.192 x 1.437 inches (141 x 132 x 36.5 mm) Weight 0.5 lbs. (0.28 kg) Environmental Limits 34 to 122° F (1.1 to 50° C) Operating Approvals FCC Class A, Part 15, Subpart B and complies with Canadian ICES-003 Class A 5.192 (1 32) 5.551 (141) 1.437 (36.5) NOTE: See the previous page for specifications in common with other models. NOTE: The CO2 models are not approved for residential applications.
PAGE 7
Demand Control Ventilation (DCV) When using applications with a modulating economizer option, the three types of Demand Control Ventilation (DCV) configurations available are: ◆ ◆ ◆ Although BAC-12xxxx FlexStats do not have a builtin CO2 sensor, they still have DCV control sequences available. When DCV is enabled in these models, IN9 is assumed to be connected to an external KMC SAE-10xx CO2 sensor.
PAGE 8
Accessories Damper (OAD/RTD) Actuators (Fail-Safe) MEP-4552 5.6 ft2 max. damper area, 45 inlb., proportional, 19 VA MEP-7552 22.5 ft2 max. damper area, 180 in-lb., proportional, 25 VA MEP-7852 40 ft2 max. damper area, 320 in-lb., proportional, 40 VA Relays (External) (R1/R2/R3) SPDT, multivoltage control relay, 1.
PAGE 9
Dimensions and Connectors BAC-12xxxx Dimensions in Inches (mm) 4.192 (1 06) Product and Documentation Awards Gold medal in the Networked/ BAS category of ConsultingSpecifying Engineer magazine’s Product of the Year competition (September 2010) ◆ Editors’ Choice product in Commercial Building Products (October 2010) Terminal Blocks on Removable Backplate for Easy Wiring ◆ 5.551 (141) 1.125 (28.