Submittal Sheet

5
Supply Voltage 24 VAC (+20%/–10%), Class 2
only
Supply Power 13 VA (not including relays)
Outputs (3/6 or 6/3) Binary outputs (NO, SPST,
Form “A” relays) carry 1 A max.
per relay or a total of 1.5 A per
bank of 3 relays (relays 1–3 and
4–6) @ 24 VAC/VDC
Analog outputs produce 0–12
VDC, 20 mA maximum
External Inputs (6) Analog 0–12 VDC (active, pas-
sive contacts, 10K thermistors)
Connections Wire clamp type terminal
blocks; 14–22 AWG, copper
Four-pin EIA-485
(Opt.) eight-pin Ethernet jack
Display 64 x 128 pixel dot matrix LCD
Case Material White (standard) or light al-
mond ame-retardant plastic
Dimensions* 5.551 x 4.192 x 1.125 inches
(141 x 106 x 28.6 mm)
Weight* 0.48 lbs. (0.22 kg)
Approvals
UL UL 916 Energy Management
Equipment listed
BTL BACnet Testing Laboratory
listed as Advanced Applica-
tion Controller (B-AAC)
FCC FCC Class B, Part 15, Subpart
B and complies with Canadian
ICES-003 Class B**
**This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Humidity Sensor (optional internal)
Sensor Type CMOS
Range 0 to 100% RH
Accuracy @ 25°C ±2% RH (10 to 90% RH)
Response Time Less than or equal to 4 seconds
Temperature Sensor (without humidity sensor)
Sensor Type Thermistor, Type II
Accuracy ±0.36° F (±0.2° C)
Resistance 10,000 ohms at 77° F (25° C)
Operating Range 48 to 96° F (8.8 to 35.5° C)
Specifications, General
Specifications, Motion Sensor
Motion/Occupancy Sensor Detection Performance
Motion Sensor (Opt.) Passive infrared with approx.
10 meter (32.8 feet) range
(for details about operation
of the motion sensor, see the
FlexStat Application Guide)
55°
X
0°
Top View
Side View
0°
46.5°
Y
(10 m)
32.8 ft
(10 m)
32.8 ft
(10 m)
32.8 ft
(10 m)
32.8 ft
55°
X
0°
Top View
Side View
0°
46.5°
Y
(10 m)
32.8 ft
(10 m)
32.8 ft
(10 m)
32.8 ft
(10 m)
32.8 ft
Temperature Sensor (with humidity sensor)
Sensor Type CMOS
Accuracy ±0.9° F (±0.5° C) oset from
40 to 104° F (4.4 to 40° C)
Operating Range 36 to 120° F (2.2 to 48.8° C)
Environmental Limits*
Operating 34 to 125° F (1.1 to 51.6° C)
Shipping –22 to 140° F (–30 to 60° C)
Humidity 0 to 95% RH (non-condensing)
Warranty 5 years (from mfg. date code)
*NOTE: Except for CO
2
sensor models—see the
next page for those specications.