Product Overview

ManualsBrandsKMC Controls ManualsDampersMulti-Function Pneumatic VAV Reset Volume Controller - 0-2" Range, 8 PSIG start (High Flow), "Universal"

Table Of Contents

Features

◆ Adjustabledirectorreverseactingreset(normal-

lyopenornormallycloseddamperseings)

◆ Adjustableminimumandmaximumsetpoints

◆ Availablein0to1"and0to2"wcdierential

pressureranges

◆ Availablewithfactory-set3,8,or10psiresetstart

points(eld-adjustable0–10psiifnecessary)

◆ SeeSpecications on page 2formoredetails

Accessories/Repair Parts

HFO-0006 In-linecontrol-airlter

HFO-0014 Gportrubbercapreplacement

HMO-4508 Mountingbracket

ICI-1005 Pressuregauge

SSS-1002 Flowsensor,onesensingpoint,

3-5/32"(80mm)length

SSS-1003 Flowsensor,twosensingpoints,

5-13/32"(137mm)length

SSS-1004 Flowsensor,threesensing

points,7-21/32"(195mm)length

SSS-1005 Flowsensor,foursensingpoints,

9-29/32"(252mm)length

Speciﬁcations and design subject to change without notice.

Description and Application 1

Models 1

Features 1

Accessories/Repair Parts 1

Details 2

Speciﬁcations 2

*(These specications do not apply to the CSC-3014/3501/3505.)

Description and Application

TheseCSC-3000seriesresetvolumecontrollersare

designedforuseonheatingorcoolingsystemswith

(normallyopenornormallyclosed)VAVterminal

unitsand(directorreverseacting)thermostats.

Theyaresub-masterairvelocitycontrollers.Each

isequippedwithseparateadjustmentknobsfor

minimumandmaximumairowsetpoints.Models

areavailablewithvariousresetstartpoints.Amaster

controller,typicallyaroomthermostat,resetsthe

CSC-3000betweentheminimumandmaximum

velocitysetpoints.

TheuniversaldesignoftheCSC-3000seriesis

intendedforneworreplacementapplicationsthat

callfordirectorreverseactingresetonnormally

openornormallyclosedVAVterminalunits.

Models

NOTE: SeealsoModel Selection Chart on page 2.

CSC-3011-10 0to1"range,8psistart

CSC-3016-10 0to2"range,8psistart

CSC-3017-16 (IdenticaltotheCSC-3011-10but

doesnotcomewithamounting

bracketorKMClogo.)

CSC-3021-10 0to1"range,3psistart

CSC-3023-10 0to1"range,10psistart

CSC-3025-10 0to2"range,8psistart(high

ow,forTrane

units)

CSC-3026-10 0to2"range,3psistart

NOTE: CSC-3000seriescontrollersareposition

sensitive.Theymustbemountedand

calibratedineitherthehorizontalor

verticalplane.

 ForthediscontinuedCSC-3014andCSC-

3501/3505models,see their separate data

sheets.Forreplacementinformation,see

theCSCControllerCross-Reference.

CSC-3000 Series*

Reset Volume Controllers

Summary of content (2 pages)

PAGE 1
CSC-3000 Series* Reset Volume Controllers Description and Application *(These specifications do not apply to the CSC-3014/3501/3505.) These CSC-3000 series reset volume controllers are designed for use on heating or cooling systems with (normally open or normally closed) VAV terminal units and (direct or reverse acting) thermostats. They are sub-master air velocity controllers. Each is equipped with separate adjustment knobs for minimum and maximum airflow setpoints.
PAGE 2
Details All dimensions are in inches (mm). CAUTION Pneumatic devices must be supplied with clean, dry control air. Any other medium (e.g., oil or moisture contamination) will cause the device to fail. Specifications Model Selection Chart Model # Reset Start Point Factory Set (all fieldadjustable 0–10 psi)* CSC-3011-10 CSC-3017-16** 8 psi (55 kPa) CSC-3021-10 3 psi (21 kPa) CSC-3023-10 10 psi (69 kPa) CSC-3026-10 3 psi (21 kPa) CSC-3016-10 CSC-3025-10 8 psi (55 kPa) Differential Pressure Min.