Product Overview

ManualsBrandsKMC Controls ManualsHeating SuppliesDA Horizontal Thermostat (55-85°F)

Table Of Contents

Features

u Adjustable min./max. temperature limits

u Additional 0–6 VDC output (T3) available for

control of KMC REE-4000 series relay modules

u Visible or hidden setpoint indicator

Description and Application

KMC CTE-1001 electronic thermostats are designed

for use with specic CEE/CEP/CSE/CSP-4000 series

controller-actuators for controlling damper actuators

and/or valves in HVAC systems. The ability to adjust

minimum and maximum limits is at the thermostat

rather than at the controller. They are single setpoint

units for cooling and heating applications. Available

model options are °F or °C scale.

An additional output is provided for control of op-

tional KMC REE-4000 series relay modules. This 0–6

VDC output (T3) is not restricted by the minimum

and maximum control points.

Cover construction allows for the setpoint indicator

and thermometer to be either visible or concealed.

Optional accessories include a blanking insert for

concealing the window, and stops to lock/restrict the

setpoint adjustment.

CTE-1001 room thermostats are intended for use

with the following KMC controller/actuators:

CEE-4000 Series

CEP-4000 Series

CSE-4000 Series

CSP-4000 Series

An optional XEE-4002 9.1 VDC power supply

module can power the CTE-1001 thermostat. Then

the CTE-1001 can be used (without the controller-

actuator) to control a damper or valve operated by

an MEP series actuator or to control other devices

via optional REE-4000 series relays.

For similar thermostats with temperature averaging

capability and altered proportional bands for fan box

relay applications, see the CTE-1101 Data Sheet.

Speciﬁcations and design subject to change without notice.

CTE-1001

Room Thermostat, DA, Single Setpoint

Models

CTE-1001-10 °F, horizontal, DA, cooling

CTE-1001-11 °C, horizontal, DA, cooling

Accessories

HFO-0027 Setpoint stops

HMO-5001 Toggle bolt assembly

HMO-5002 Insulating backplate, 1-1/8" deep

HMO-5007 Insulating backplate, 1-11/16"

deep

HSO-5001 Calibration test leads

REE-4000 series Relay modules

XEE-4002 9.1 VDC power supply module

Description and Application 1

Features 1

Models 1

Accessories 1

Details 2

Speciﬁcations 2

NOTE: For many applications, the CTE-1001 (and

discontinued CTE-1002) can be replaced

by a CTE-5202 electronic thermostat

with an LCD display. For details, see the

CTE-5202 Data Sheet and the CTE-5202

Applications Guide.

Summary of content (2 pages)

PAGE 1
CTE-1001 Room Thermostat, DA, Single Setpoint Description and Application KMC CTE-1001 electronic thermostats are designed for use with specific CEE/CEP/CSE/CSP-4000 series controller-actuators for controlling damper actuators and/or valves in HVAC systems. The ability to adjust minimum and maximum limits is at the thermostat rather than at the controller. They are single setpoint units for cooling and heating applications. Available model options are °F or °C scale.
PAGE 2
Details All dimensions are in inches (mm). T1 & T3 VDC OUTPUT T3 OUTPUT, D.A. T1 OUTPUT, D.A. 6 5 4 3 2 1 0 -1˚F CTE-1001 CTE-1002 ∅ SETPOINT +1˚F SPACE TEMPERATURE SPACE TEMPERATURE D.A. COOLING R.A. HEATING Specifications Supply Voltage 9.1 VDC (5 mA) ±5% Output Range 0 to 6 VDC Range 55 to 85° F (13 to 29° C) Proportional Band Thermostat Action 2° F (1.1° C) Direct Acting Cover Type Furnished, with window Material Light almond flame-retardant plastic Weight 3.5 oz.