Datasheet

ManualsBrandsKME Italy S.p.A. ManualsMechanical ComponentsSheet Copper, 300x300x0.5mm

Page 1

Alloy Designation KME 100

EN Cu-ETP

(E-Cu, E-Cu58)

DIN CEN/TS 13388 CW004A

JIS C 1100

UNS C11000

Chemical Composition

Weight percentage

Cu ≥

99.90 %

O 0.005 .. 0.040 %

This alloy is in accordance with RoHS

2002/96/CE for electric & electronic equip-

ments

and 2002/53/CE for automotive

industry

Physical Properties

Typical values in annealed temper at 20 °C

Density 8.9 g/cm³

Thermal expansion coefficient -191 .. 16 °C

0 .. 300 °C

14.1

17.7

-6

Specific heat capacity 0.386 J/(g·K)

Thermal conductivity 394 W/(m·K)

Electrical conductivity (1 MS/m = 1 m/(Ω

mm²) ≥

58 MS/m

Electrical conductivity (IACS) 100 %

Thermal coefficient of electrical resistance (0 .. 200 °C) 3.7 10

-3

Modulus of elasticity ( 1 GPa = 1 kN/mm²) cold formed

annealed

130

127

GPa

Preferred Applications

Transformer Fuse; Relay Box;

Punshed

Screen

Cable Strip Current Carrying

Capacity

xx xx xx xx

x = well suited xx = particularly well suited

Characteristics

Cu-ETP is an oxygen containing copper which has a very high

electrical and thermal conductivity. It has excellent forming

properties. Due to its oxygen content soldering and welding

properties are limited. The alloy is registered US EPA antimicrobial.

Copper Rolled Products

We produce a vast assortment of copper rolled products with highest

purity in various in chemical compositions, sizes and formats, all

suited to many types of final processing.

Main Applications

Automotive Radiators, Gaskets

Builders

Hardware Cotter

Pins, Butts, Ball Floats, Nails, Tacks, Soldering

Copper, Rivets

Consumer

Christmas Ornaments

Electrical

Transformer

Coils, Switches, Terminals, Contacts, Radio Parts, Busbars, Terminal Connectors, Conductors,

Stranded

Conductors, Cable

Strip

Fasteners

Industrial Printed

circuit

boards, Stamped

parts, Pressure

Vessels, Chemical

Process

Equipment, Chlorine

Cells, Chimney

Cap Screens, Heat

Exchangers, Printing Rolls, Anodes, Rotating

Bands, Kettles, Pans, Vats, Heat

sinks

Cu-ETP

C11000

KME 100

Industrial

Rolled

Summary of content (8 pages)

PAGE 1
Cu-ETP C11000 KME 100 Industrial Rolled Alloy Designation KME 100 EN Cu-ETP (E-Cu, E-Cu58) DIN CEN/TS 13388 CW004A JIS C 1100 UNS C11000 Copper Rolled Products We produce a vast assortment of copper rolled products with highest purity in various in chemical compositions, sizes and formats, all suited to many types of final processing. Chemical Composition Weight percentage Characteristics Cu ≥ 99.90 % O 0.005 .. 0.
PAGE 2
Cu-ETP C11000 KME 100 Industrial Rolled Mechanical Properties (EN 1652) Temper Hardness Rp0.2 Elongation Minimum A50mm MPa MPa % HV 220 .. 260 < 140* 33 40 .. 65 R240 240 .. 300 ≥ 180 8 65 .. 95 R290 290 .. 360 ≥ 250 4 90 .. 110 R360 ≥ 360 ≥ 320 2 ≥ 110 R220 annealed Tensile Strength Rm Yield Strength HV * * only for information Electrical Conductivity E . C o n d u ctivity [M S /m ] 60 Electrical conductivity is strongly influenced by chemical composition.
PAGE 3
Cu-ETP C11000 KME 100 Industrial Rolled Bending Properties Thickness: ≤ 0.5 mm relative Bending Radius R/T 6 5 4 Bending test according to EN ISO 7438 is done with 10 mm wide samples. Smaller samples in general – as well as lower thickness – allow a lower bending radius without cracks. If needed we supply bending optimized temper classes that far exceed standard quality. Please take care when comparing with ASTM E 290 results, there the bend definition direction is contradictory.
PAGE 4
Cu-ETP C11000 KME 100 Industrial Rolled Sanitary and Antimicrobial Properties Copper has been recognised as a hygienic material since the dawn of civilisation and, in the last two centuries, the anecdotal evidence has been supported by scientific research showing that copper is antimicrobial, i.e. it inhibits the growth of harmful pathogens bacteria, moulds, algae, fungi and viruses.
PAGE 5
Cu-ETP C11000 KME 100 Industrial Rolled Customized Tolerances Camber Rolling direction h L Evenness Our products are produced in accordance with relevant norms EN 1652 / EN 1654. Customer specific tolerances for Thickness, Width, Camber, Transverse Flatness, Evenness, Twist and Coil set can be defined. We will be happy to meet your demands. EN 1652 defines only camber.
PAGE 6
Cu-ETP C11000 KME 100 Rolled Products Formats Dimension* Coil Strip thickness (other thicknesses on request) Strip width Outside diameter Weight (Standard) Weight (Deep-Drawing Quality) Weight per mm ≥ 0.1 .. 6.00 ≥ 3 .. 1,250 ≤ 1,400 ≤ 8,400 ≤ 8,000 ≤ 12.0 mm mm mm kg kg kg Traverse wound strip Thickness Width Weight Drums: wood, plastic, metal, flangeless ≥ 0.2 .. ≤ 1.50 ≥ 8 .. ≤ 60.0 300 ..
PAGE 7
Cu-ETP C11000 KME 100 Industrial Rolled Surface coatings & Special Treatments * Dimension Hot-Dip tinned and STOL®28M Tin-Silver STOL®13 Thermic Sn Width Thickness Tin Layer Thickness Different thickness per side possible R360 on request Electroplating Width Thickness Tin, Silver, Gold, Cu-Flash, Ni-Flash, Selective plating Other coatings on request Profiled strips STOL®Multigauge Width Thickness ≤ 330 ≤ 1.5 0.4 .. 20 mm mm µm ≤ 400 ≤ 2.5 mm mm 15 .. 90 0.23 .. 1 mm mm ≥ 200 .. 1,250* 0.
PAGE 8
Cu-ETP C11000 KME 100 Industrial Rolled AUSTRIA FRANCE SINGAPORE KME Austria Vertriebsgesellschaft m.b.H Postfach 128 1232 Wien Phone + 43-1-6 16 79 86-0 Fax + 43-1-6 16 79 86-36 E-Mail info-at@kme.com KME France S.A.S. 11 bis. rue de l‘Hôtel de Ville 92411 Courbevoie Cedex Phone + 33 1 478 96-868 Fax + 33 1 466 71-212 E-Mail info@kme.com KME Asia Pte. Ltd. 51 Lorong 17 Geylang #06-01 Superior Industrial Building Singapore 388571 Phone + 65-63 37 86 71 Fax + 65-67 48 22 34 E-Mail info-asia@kme.