User's Manual

DANGER
L hd
DANGER
El t i h k h d
1. Safety – Specific hazards
L
aser
h
azar
d
This equipment operates with invisible laser radiation.
Laser radiation can cause considerable injuries to the
eyes.
Never look into the end o
f
an ex
p
osed
f
iber or into an
El
ec
t
r
i
c s
h
oc
k h
azar
d
Working in severe weather can result in personal
injury or death and damage to the equipment.
Never install or perform maintenance during severe
weather
(
hi
g
h winds, li
g
htnin
g
, blizzards, hurricane
fpf
open optical connector when the optical source is
switched on. Always observe the laser warning
instructions.
(g g g
etc.).
WARNING
Electric shock hazard
Some parts of all electrical installations are
CAUTION
Some parts of all electrical installations are
energized. Failure to follow safe work practices and
the safety warnings may lead to bodily injury and
property damage.
For this reason, only trained and qualified personnel
(electrical workers as defined in IEC 60215 or EN 60215
Laser hazard
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous laser radiation exposure.
Do not view directly into the laser beam with optical
DANGER
Li
g
htnin
g
strike hazard
(electrical workers as defined in IEC 60215 or EN 60215
+ A1 or in the National Electrical Code or in ANSI/NFPA
No. 10) may install or service the installation.
Do not view directly into the laser beam with optical
instruments such as a fiber microscope because
viewing of laser emission in excess of Class 1 limits
significantly increases the risk of eye damage.
Never look into the end of an exposed fiber or an open
connector as long as the optical source is switched on.
gg
Lightning strikes are possible during stormy weather,
and could result in death or severe injury.
Do not work on the installation itself or on the power
supply lines or antenna feeders of an antenna during
stormy weather
connector as long as the optical source is switched on.
Ensure that the optical source is switched off before
disconnecting optical fiber connectors.
Alcatel-Lucent RRH 2x60-B4
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
3MN-01520-0002-RJZZA Issue 0.02 March 2014
stormy weather
.
Sheet 4 of 24