User's Manual

iDEN 800MHz RRH User Guide
6
4. Operate GUI Program
 Run GUI Program.
Input RRH’s IP and click the Connect button
 Setup the carrier configuration on the index to turn on carrier power.
If you want to make LTE single carrier configuration, please follow below setting and click (A) SET button.
Ex) 1FA setup with LTE signam on Index 3 (Tx; 865.4MHz, Rx; 820.4MHz)
Index : 3
STATE : [v] Enable
TXCONTAINER : [v] 2
TX2CONTAINER : [v] 2
RX1CONTAINER : [v] 3
RX2CONTAINER : [v] 8
TXFREQ : [v] 865400
RXFREQ : [v] 820400
CARRTYPE : [v] LTE