User's Manual
Table Of Contents
- User Manual
- For
- POD System
- Safety and Regualtion Warning Notice
- 1. POD System Overview
- 2. POD system Components
- 2.1 Head-end Unit
- 2.2 Remote Unit
- 3. Equipment Installation
- 4. Cable Connection
- 5. Specification
User Manual for POD Systems Revision: 0.7
© KMW USA Inc.
1818 E. Orangethrope Ave, Fullerton, CA 92831
Tel. +1 (714) 515-1100
www.kmwcomm.com
79
4. CABLE CONNECTION
4.1 Head-end Unit Cable Connection
4.1.1 Cable
RF Cable
- Between modules in H-SRU or between H-SRUs
Downlink
Connector: SMB-L, female
Cable Color: Blue Jacket
Uplink
Connector: SMB-L, female
Cable Color: Yellow Jacket
- CAUTION) RF cable with 35” length will be provided normally. 60” and 90” RF cable can be provided by user’s
special order.
Ethernet cable
- Between H-DMCU and H-SCM or H-PSU
Connector: RJ45, female
Length: 2m
Power & Signal cable
- Between H-DMCU and H-PSU
Length: 30cm
- Between H-SRU and H-PSU
Length: 2m
- Between H-SRU and H-FAU
Length: 40cm
- AC Power Cable
Length: 2m
GND Cable
- H-DMCU, H-PSU, H-SRU
Length: 1m
Figure 4-1 Head-end - cables
Downlink
RF cable
Uplink
RF cable
Ethernet
Cable
H-DMCU~
H-PSU
H-SRU~
H-PSU