User's Manual

User Manual for POD Systems Revision: 0.7
© KMW USA Inc.
1818 E. Orangethrope Ave, Fullerton, CA 92831
Tel. [phone]
www.kmwcomm.com
30
2.1.4 POD-H-MCM
Figure 2-16 POD-H-MCM
2.1.4.1 Functions and features
- In case of small size DAS system, H-MCM can replace H-DMCU.
- Controls, monitors, and generates alarms for all modules and units connected to H-MCM via Ethernet cable,
backboard of H-SCM, or optic cable.
- Provides web-based GUI interface to user
- Provides the user interface to control and monitor using LCD window and key pad.
- Send alarms to O&M system by SNMP.
- Input/output ports for external alarm monitoring
2.1.4.2 Specifications
- Size, weight, and power consumption : refer to Table 2-1
2.1.4.3 LED, LCD & Key PAD, Reset
External Alarm
Input
Output
1
2
3
4