User's Manual

User Manual for POD Systems Revision: 0.7
© KMW USA Inc.
1818 E. Orangethrope Ave, Fullerton, CA 92831
Tel. [phone]
www.kmwcomm.com
49
Table 2-23 POD-H-HOM-L LED Operation
Specifications
PWR
Solid Green
When power is on.
Off
When power is off.
ALM
Off
When POD-H-HOM-H has no alarms.
Solid Yellow
When POD-H-HOM-H has minor alarm.
Solid Red
When POD-H-HOM-H has major alarm.
DL/UL
Off
When PD fails.
Solid Yellow
When PD is Normal.
DL 1/DL 2
Blink Green
At the cable connection guide, green led blinks to indicate which
RF ports should be connected to.
UL 1/UL 2
Blink Green
T_Sync
Blink Green
2.1.10.4 Optic port
Figure 2-39 optic port
 LD
- Connected to high power Remote Unit.
- Transfers downlink optic signal to high power Remote Unit.
- Connector Type: LC APC Female
 PD
- Connected to high power Remote Unit.
- Receives Uplink optic signal from high power Remote Unit.
- Connector Type: LC APC Female
2.1.10.5 Communication port
Figure 2-40 Communication Port
- This port provides communication path between H-HOM-H and H-SCM through backboard of H-SRU.
- +24V DC is provided through this communication port from backboard of H-SRU.
- H-HOM-H acquires ID information such as Rack ID, Sub rack ID and Slot ID through this communication port.
The IP address of H-HOM-H is assigned automatically using the acquired ID information.
2.1.10.6 Alarms
Table 2-24 POD-H-HOM-H - Alarms
Alarm Name
Description
Remedy
Alarm
Severity
LED
color
High Temperature
Temperature too high
Check environment
Major
Red
Temperature high
Minor
Yellow
Low Temperature
Temperature too low
Minor
Yellow
#1