User's Manual

User Manual for POD Systems Revision: 0.7
© KMW USA Inc.
1818 E. Orangethrope Ave, Fullerton, CA 92831
Tel. [phone]
www.kmwcomm.com
14
1. POD SYSTEM OVERVIEW
POD System is a compact and flexible platform which is designed to provide effective service coverage for
various indoor and outdoor applications.
POD system supports multiple wireless standards currently being used such as CDMA/EVDO, WCDMA and LTE,
as well as high traffic capacity and flexible distribution by sectorization and various flexibilities for future expansions.
POD system supports effectively DAS Network Management system by using Ethernet communications
connected to between Head-end Unit and Remote Unit.
1.1 Features of POD System
 A unified platform
- A single head-end unit supports low & high power RU, indoor & outdoor RU.
- A single head-end supports all commercial frequencies bands from 700M to 2.6G and public safety
frequencies bands including UHF/VHF, PS700 and PS800.
 ALL IP structure
- All modules and units have its unique IP address which is assigned automatically when installed.
 Supported capacity per a DMCU
- A DMCU supports up to 4 racks. (a rack can support up to 7 H-SRUs)
- A DMCU supports up to 4 H-OIMs and 6 H-OEMs.
 The User-friendly Web based GUI
- Web based GUI interface at head-end unit and Remote Unit.
- Firmware download for all connected active modules at remote site and right at the head-end
- Sectorization/commissioning at remote site and right at the head-end
 Easy installation, commissioning and optimization
- Auto system commissioning
- DAS tree/Inter-connection diagram/rack diagram
- System configuration backup/restore
 Monitoring functions for DAS system
- Downlink spectrum monitoring which is built in H-FEM
- SNMP/Remote monitoring & control
- Uptime
- Save log @H-DMCU, save alarm history @each module
 Monitoring interface for other equipments connected to DAS
- Ethernet port forward function
- Input/output ports for external alarm monitoring
 Hot Swap
- All modules installed in H-SRU support hot swap function, so all the modules can be replaced without
powering down H-SRU.
 Documentation
- Auto BOM Generation
- System Information Generation
- Provide external memory for saving documents such as closeout package, user manual
 SMB-L connector (SMB with lock)
- SMB-L connector makes RF cable connections between RF ports easier, comparing to SMA connector.