User's Manual
Table Of Contents
- User Manual
- For
- POD System
- Safety and Regualtion Warning Notice
- 1. POD System Overview
- 2. POD system Components
- 2.1 Head-end Unit
- 2.2 Remote Unit
- 3. Equipment Installation
- 4. Cable Connection
- 5. Specification
User Manual for POD Systems Revision: 0.7
© KMW USA Inc.
1818 E. Orangethrope Ave, Fullerton, CA 92831
Tel. +1 (714) 515-1100
www.kmwcomm.com
27
Figure 2-10 DC input port & Fuse
DC Input port
- The 24V DC power is supplied from H-PSU through this port, and this port includes H-SRU ID, rack ID which
is set by ‘Rack ID’ dip switch in H-PSU.
FUSE
- Current capacity: 15A
- The fuse protects the damages of all modules installed in H-SRU due to high current.
- H-SRU provides spare fuse for just in case fuse is broken.
2.1.2.4 FAN port
Figure 2-11 FAN port
- DC Power is supplied into the FAN Unit through this port.
- FAN fail alarm is transferred to H-SCM through this port.
2.1.2.5 Ground port
- Refer to section 3.2.2
- 30 -
HPSU
FUSE
- 30 -
Spare Fuse
FAN