User's Manual

User Manual for POD Systems Revision: 0.7
© KMW USA Inc.
1818 E. Orangethrope Ave, Fullerton, CA 92831
Tel. [phone]
www.kmwcomm.com
28
2.1.3 POD-H-SCM
Figure 2-12 POD-H-SCM
2.1.3.1 Functions and features
- One H-SCM can be installed in one H-SRU.
- Provides web-based GUI interface to user
- Provides the user interface to control and monitor using LCD window and key pad.
- Provides physical path between H-DMCU and all modules in H-SRU
- Controls FAN on/off and FAN speed and monitors FAN alarm.
- Periodically, gather the data from all modules in H-SRU and send it to H-DMCU through DMCU port.
- Periodically, gather the data from RUs connected to H-HOM in H-SRU and send it to H-DMCU through DMCU
port.
2.1.3.2 Specifications
- Size, weight, and power consumption : refer to Table 2-1
2.1.3.3 LED, LCD & Key PAD, Reset
Figure 2-13 LED, LCD & Key PAD
 LCD window and key pad
- H-SCM provides the user interface to control and monitor using LCD window and key pad.
 Reset
- Used for H-SCM reset.
Table 2-5 POD-H-SCM LED Operation
Specifications
RUN
Solid Green
When power is on.
OFF
When power is off.
Link
Solid Yellow
When H-SCM cannot communicate with at least one module
among modules installed in H-SRU.
OFF
When H-SCM communicates with all modules installed in H-SRU.
Alarm
Solid Red
When H-SCM has major alarm.
Run Link ALM Reset
ENT
Up
Down
ESC
DMCU Web GUI
SCM
KMW
Run Link ALM Reset
ENT
Up
Down
ESC