User's Manual

User Manual for POD Systems Revision: 0.7
© KMW USA Inc.
1818 E. Orangethrope Ave, Fullerton, CA 92831
Tel. [phone]
www.kmwcomm.com
29
Solid Yellow
When H-SCM has minor alarm.
OFF
When H-SCM has no alarm.
2.1.3.4 Ethernet Port
Figure 2-14 Ethernet Port
 DMCU port
- Provides physical communication path between H-DMCU and all modules in H-SRU by connecting DMCU
port of H-SCM to available one port among Ethernet port #1~#32 of H-DMCU.
 Web GUI port
- Used to access to web-based GUI using notebook or desktop PC.
2.1.3.5 Communication port
Figure 2-15 Communication Port
- This port provides communication path between H-FEM-H-x, H-COM, H-DTM, H-STM, HOM-x or H-SCM
installed in H-SRU through backboard of H-SRU.
- +24V DC is provided through this communication port from backboard of H-SRU.
- H-SCM acquires ID information such as Rack ID, Sub rack ID and Slot ID through this communication port.
The IP address of H-SCM is assigned automatically using the acquired ID information.
2.1.3.6 Alarms
Table 2-6 POD-H-SCM - Alarms
Alarm Name
Description
Remedy
Alarm
Severity
LED
color
High Temperature
Temperature high
Check environment
Minor
Yellow
Low Temperature
Temperature too low
Minor
Yellow
FAN
FAN Fail
Check FAN
Minor
Yellow
Module Comm. Fail
Module Communication Fail
Check Module connection
Minor
Yellow