User's Manual

User Manual for POD Systems Revision: 0.7
© KMW USA Inc.
1818 E. Orangethrope Ave, Fullerton, CA 92831
Tel. [phone]
www.kmwcomm.com
31
Figure 2-17 LED, LCD & Key PAD, Reset
 LCD window and key pad
- H-MCM provides the user interface to control and monitor using LCD window and key pad.
 Reset
- Used for H-MCM reset.
 LED
Table 2-7 POD-H-MCM LED Operation
Specifications
Run
Solid Green
When power is on.
OFF
When power is off.
Link
Blink Green
When H-MCM cannot communicate with at least one module or
units connected to H-MCM.
OFF
When H-MCM communicates all modules and units connected to
H-MCM.
MCM Alarm
Blink Green
When H- MCM itself has minor alarm.
OFF
When H- MCM itself has no alarm.
HE Alarm
Blink Green
When at least one module or unit connected to H-MCM has
minor alarm.
Solid Red
When at least one module or unit connected to H-MCM has
major alarm.
OFF
When all modules and units connected to H-MCM have no alarm.
RU Alarm
Blink Green
When at least one RU connected to H-MCM has minor alarm.
Solid Red
When at least one RU connected to H-MCM has major alarm.
OFF
When all RUs connected to H-MCM have no alarm.
2.1.4.4 Ethernet Ports
Figure 2-18 Ethernet ports
 Modem port
- Connected to wireless modem which provides connection with O&M center.
 Web GUI port
- Used to access to web-based GUI using notebook or desktop PC.
 HSRU1~HSRU3 Ethernet Port
- Connected to H-SRU so that H-MCM can monitor and control the connected all modules installed in H-SRU.
HSRU 1 HSRU 2 HSRU 3
Modem
Web GUI