User's Manual

User Manual for POD Systems Revision: 0.7
© KMW USA Inc.
1818 E. Orangethrope Ave, Fullerton, CA 92831
Tel. [phone]
www.kmwcomm.com
35
2.1.5.3 RF Port and LED
H-FEM-L-7/P7P8/S8/C/A/W
H-FEM-L-P
H-FEM-L-B
Front Panel
Rear Panel
Figure 2-22 POD-H-FEM-L-x RF port and LED
 RF Ports
- DL/UL-A(B), UL-Div A(B)
 Linked to BTS RF ports
 When the RF port linked to BTS is duplex port, connect to DL/UL-A(B)
 When the RF ports linked to BTS are TX/RX port, connect DL/UL-A(B) to TX port and UL Div A(B) to RX
port.
 Connector Type: SMA Female
- Connector Type: SMA DL MON-A(B), UL MON-A(B)
 Used to monitor DL input or UL output for path A or B
 Connector Type: SMB-L Female
- DL OUT-A(B), UL IN-A(B)
 DL OUT- A(B): DL output port for path A or B, Linked to H-COM or H-DTM
 UL IN- A(B): UL input port for path A or B, Linked to H-COM or H-DTM
 Connector Type: SMB-L Female
UL MON
DL MON
DL Out
UL In
UL MON
DL MON
DL Out
UL In
PWR
ALM
Path A
Path B
DL Out
UL MON
UL In
DL MON
PWR
ALM
UL MON
DL MON
DLOut
UL In
UL MON
DL MON
DL Out
UL In
PWR
ALM
Path A
Path B
#1
#2
#3
#4
T-Sync
DL / UL (A)
UL Div (A)
DL / UL (B)
UL Div (B)
DL / UL (A)
UL Div (A)
DL / UL (A)
DL / UL (B)