User's Manual

User Manual for POD Systems Revision: 0.7
© KMW USA Inc.
1818 E. Orangethrope Ave, Fullerton, CA 92831
Tel. [phone]
www.kmwcomm.com
79
4. CABLE CONNECTION
4.1 Head-end Unit Cable Connection
4.1.1 Cable
 RF Cable
- Between modules in H-SRU or between H-SRUs
 Downlink
 Connector: SMB-L, female
 Cable Color: Blue Jacket
 Uplink
 Connector: SMB-L, female
 Cable Color: Yellow Jacket
- CAUTION) RF cable with 35” length will be provided normally. 60” and 90” RF cable can be provided by user’s
special order.
 Ethernet cable
- Between H-DMCU and H-SCM or H-PSU
 Connector: RJ45, female
 Length: 2m
 Power & Signal cable
- Between H-DMCU and H-PSU
 Length: 30cm
- Between H-SRU and H-PSU
 Length: 2m
- Between H-SRU and H-FAU
 Length: 40cm
- AC Power Cable
 Length: 2m
 GND Cable
- H-DMCU, H-PSU, H-SRU
 Length: 1m
Figure 4-1 Head-end - cables
Downlink
RF cable
Uplink
RF cable
Ethernet
Cable
H-DMCU~
H-PSU
H-SRU~
H-PSU