User's Manual

The information in this document is subject to change without notice
Copyright 1991 ~ 2012 KMW, INC. All Rights Reserved
©
14
Document Revision V0.61 2013.01.11
Pages
R
Street Light (HR) Installation & Operation User Guide
Keep the lamp and the light pole so arranged that
the AC power cable is not stuck between them be-
fore you bond them together.
Attach the lamp to the light pole like the fol-
lowing gure:
Once the lamp is installed, use xing bolts to x it to
the light pole.
When you remove the cap on top of the lamp as il-
lustrated in the gure, you will see three lamp xing
nuts called M10 Set Screw (Mood Bolt) inside.
Use a hexagonal wrench to tighten the xing bolts
until the lamp is tightly bonded with the light pole.
Once the xing bolts are in their positions, recover
the top with the cap.
STEP. 16
STEP. 17
STEP. 18
Light Installation