User's Manual

Document NO. Revision NO. 0.1 Page 3 / 4
Project Code Revised Date 2013-09-30 Prepared by S.J Byun
Project Name K-LCS [NODE ] Checked by
Subject Manual Approved by S.Seok
1.3 Notice
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
A label must be affixed to the outside of the host product with the following statements:
This device contains FCCID: ORI-ZBNODE
1.4 Caution Statement for Modifications
CAUTION : Any Changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment.
1.5 Mobile Device RF Exposure Statement
RF Exposure - This device is only authorized for use in a mobile application. At least 20 cm of separation distance
between the transmitting antenna device and the user's body must be maintained at all times.
1.6 Mobile Device RF Exposure Statement
The module is limited to OEM installation only.
OEM integrators must ensure that the end-user has no manual instructions to remove or install the
module.. OEM's must comply with FCC marking regulation part 15 declaration of conformity (Section
2.925(e)).
This module is to be installed only in mobile or fixed applications (Please refer to FCC CFR 47 Part
2.1091(b) for a definition of mobile and fixed devices).
The separate approval is required for all operating configurations, including portable configurations with respect to
FCC CFR 47 Part 2.1093 and different antenna configurations.
The K-LCS [Node] module has been designed to operate with the following antenna and gains. Use with
other antenna types or with these antenna types at higher gains is strictly prohibited.
Type of Antenna Gain (dB) Type of
Connector
Planar Inverted
F antenna
2.59 dBi MCX(F) type