User Manual

ASSEMBLY INSTRUCTIONS
Model 100 JOBMASTER® ROLLING CABINET
DANGER
Latch
Handle
5/16-18 x 3/4
Truss Spin Screw
5/16-18
Whiz Nut
1/4-20 Nylon
Lock Nut
LATCH SIDE
REV. C 11/00 Part No. 14-0004
WARNING
Black knob must be in the
lower left position & securely
latched when moving this
cabinet, so unit will not open
& tip over on inclines, which
can cause serious personal
injury or property damage.
Knob
1/4-20 x 5/8
Hex Hd Bolt
Caster Brakes are not suitable
for keeping units in place
when transporting.
Secure by another method.
Do not use casters on rough
or uneven surfaces. Do not
tow caster mounted boxes.
 Do not put fuels, flammables, explosives or hazardous materials
inside these products.
 Gasoline, solvents, gun powder or other munitions, dynamite,
propane, acetylene or other such products can explode if stored
inside these products.
 Use these products ONLY for storing and transporting electric or
hand tools and equipment, and other similar materials.
 Failure to follow these warnings or modification or other uses of
these products could result in death, serious injury or property
damage.
CAUTION