Installation Sheet

Product: TT100 Full Extension Ball-Bearing Drawer Slide
Mounting: Side
Clearance: 1/2" [12.7mm +.8mm minus 0]
Load Class: 100 lb.
Height: 1.79" [45.5mm (±0.3)]
Finish: Zinc
Action: Full Extension (sizes: 12" – 28")
Sizes: 10" [250mm], 12" [300mm], 14" [350mm], 16" [400mm], 18" [450mm],
20" [500mm], 22" [550mm], 24" [600mm], 26" [650mm], 28" [700mm]
Max. Recommended
Drawer Width: 24"
Packaging: 10 Pair and 1 set of instructions per box. Mounting hardware not included
Slides are unhanded
Optional: Rear Mounting Brackets:
TT401 200 (10 inner boxes of 20 brackets)
TT401B 200 (200 loose brackets)
Part Number Size Slide Length Slide Travel A B C D
TT100B 250
10" 250mm [9.84"] 250mm [9.84"] — — — —
TT100B 300
12"
300mm [11.81"] 300mm [11.81"] 224mm [8.82"] — — —
TT100B 350
14" 350mm [13.78"] 350mm [13.78"] — — 128mm [5.04"] 256mm [10.08"]
TT100B 400
16" 400mm [15.75"] 400mm [15.75"] 288mm [11.34"] — 160mm [6.30"] 320mm [12.60"]
TT100B 450
18"
450mm [17.72"] 450mm [17.72"] 352mm [13.86"] — 160mm [6.30"] 352mm [13.86"]
TT100B 500
20" 500mm [19.69"] 500mm [19.69"] 352mm [13.86"] 416mm [16.38"] 192mm [7.56"] 416mm [16.38"]
TT100B 550
22" 550mm [21.65"] 550mm [21.65"] 352mm [13.86"] 416mm [16.38"] 224mm [8.82"] 448mm [17.64"]
TT100B 600
24"
600mm [23.62"] 600mm [23.62"] 224mm [8.82"] 352mm [13.86"] 480mm [18.90"] 256mm [10.08"]
TT100B 650
26"
650mm [25.29"] 650mm [25.29"] 224mm [8.82"] 352mm [13.86"] 544mm [21.42"] 288mm [11.34"]
TT100B 700
28" 700mm [27.56"] 700mm [27.56"] 224mm [8.82"] 352mm [13.86"] 544mm [21.42"] 288mm [11.34"]
310376-0516
1/2"
[12.7mm]
Profile Release Lever
TT100 Full Extension Ball-Bearing Drawer Slide
TT100
Distributed by Knape & Vogt Manufacturing Company.
2700 Oak Industrial Drive NE Grand Rapids, MI 49505 USA | 800.253.1561 | 616.459.3311 | fax [phone] | www.kv.com
2.0625"
[52mm]
1.89"
[48mm]
3.5"
[89mm]
Rear Mounting Bracket (sold separately)
1.79"
[45.5mm ±
0.3]
4.5mm DIA TYP
[.177"]
4.5 X 9.5mm
SLOT TYP
[.177 x .37"]
9.5mm TYP
[.37"]
16mm
TYP
[.63"]
TRAVEL
51mm
[2.00"]
C
D
L
4.5mm DIA TYP
[.177"]
6.4mm DIA TYP
[.250"]
4.5 X 10.5mm
SLOT TYP
[.177 x .41"]
139mm
[5.47"]
76mm
[3.00"]
35mm
[1.38"]
64mm
[2.52"]
16mm TYP
[.62"]
224mm
[8.82"]
A
B
19mm
[.75"]
128mm
[5.04"]
16mm
TYP
[.62"]
Cabinet Member
4.5mm DIA TYP
[.177"]
4.5 X 9.5mm
SLOT TYP
[.177 x .37"]
9.5mm TYP
[.37"]
16mm
TYP
[.63"]
TRAVEL
51mm
[2.00"]
C
D
L
4.5mm DIA TYP
[.177"]
6.4mm DIA TYP
[.250"]
4.5 X 10.5mm
SLOT TYP
[.177 x .41"]
139mm
[5.47"]
76mm
[3.00"]
35mm
[1.38"]
64mm
[2.52"]
16mm TYP
[.62"]
224mm
[8.82"]
A
B
19mm
[.75"]
128mm
[5.04"]
16mm
TYP
[.62"]
Drawer Member
1
2
Warranty Information
KV Tru-Trac
™
offers a One Year Limited Warranty to the initial purchaser of this product.
This warranty covers defects in materials and workmanship, which occur during normal
use, and the remedy is limited to only repair or replacement of the defective product,
at Tru-Trac’s option. This warranty does not apply to defects resulting from misuse,
damage or abuse, normal wear and tear, accident, modification, improper installation or
maintenance, third party materials or damage during shipping.
For warranty service, please contact Tru-Trac, PO Box 150047, Grand Rapids, Michigan
49515-0047. Any defective product must be returned postage or freight prepaid to
Tru-Trac and must include a claimed defect and date of purchase.
THIS ONE YEAR LIMITED WARRANTY CONSTITUTES THE ONLY WARRANTY AND SOLE
REMEDY FOR THE PRODUCTS AND ALL OTHER WARRANTIES OR REPRESENTATIONS
ARE HEREBY EXPRESSLY DISCLAIMED.