Instructions / Assembly

Installation Instructions (continued)
Adjustable Glass Shelf Kit
0132-524-GL2
Caution:
- Do not overtighten screws as they
may cause stripping and result in
loss of shelf integrity
Figure 3
Installation:
Step 7: Place each finial in the top and bottom ends of each standard Figure 3.
NOTE: If the finials don’t fit loosen the screws, insert the finials, and re-tighten
the screws.
Step 8: Attach shelf clamps by inserting them into the slots located on the left side of
the standards at the desired heights Figure 4. Tap shelf clamp down to lock in place.
NOTE: Each shelf clamp must be level with the shelf clamp directly across from it
on the other standard.
Step 9: Attach the shelves by placing them into the shelf clamp. Once in the correct
position use a screwdriver to tighten the clamps Figure 5.
Figure 4 Figure 5
Tighten clamp
to secure shelf
2700 Oak Industrial Dr. NE
Grand Rapids, MI 49505
800-253-1561
www.kv.com
[e-mail]
©2015 Knape & Vogt. KV and the KV logo are trademarks of Knape & Vogt. 310454/0715