Specification

Light-Duty
35 lb. Load Class
Max. Drawer Width: 18"
Profile
1129 3/4 Extension Center
Undermount Slide
The value-priced 1129 Light-Duty Center Undermount Drawer Slide is easy to install and replace.
Applications
• KitchenandBathCabinets
• Millwork
• Light-DutyUndermountApplications
Specifications
Model: 1129 3/4 Extension Center Under Drawer Slide
Mounting: Under-drawer
Disconnect: Friction
Hole Pattern: Traditional
Face Frame Mounting: No
Type: Ball-Bearing
Travel: 3/4 Extension
Finish: Zinc
Length: 12", 14", 16", 18", 20", 22", 24"
Clearance: 1.52" [38.6 mm]
Height: .39" [10mm]
Packaging: PolyPack(1129P):allsizes-10pairpercarton
Slide Configuration: Unhanded
Rating
Load: 35 lb.
Max. Drawer Width: 18"
As with all Knape & Vogt drawer slides, the 1129 is designed to meet or exceed
ANSI performance standards as established by BIFMA, BHMA and KCMA.
Hardware
#6 x 5/8 Phillips Flat Head – Slide
#7x1/2"PhillipsPanHead–RearBracket
Warranty
Limited Lifetime Warranty
2700OakIndustrialDr.NE
GrandRapids,MI49505-6026USA
1.800.253.1561 | 616.459.3311
Fax: [phone]
www.kv.com
Knape & Vogt reserves the right to change product specifications at any time without notice and without incurring
responsibility for existing units.
©2016Knape&Vogt.KVandtheKVlogoaretrademarksofKnape&Vogt. OL2871/0416
.34 [8.6mm]
.395 [10mm]
1.35
[34.4mm]
1.93
[49.0mm]
1.52
[38.6mm]
1.385
[35mm]
Clearance
1.52" [38.6 mm]