Manual

ManualsBrandsKnape&Vogt ManualsFor HomeBYP-100A Series

Assembly

Instructions

d’assemblage

Instrucciones para

el ensamblaje

Tools Required • Outils requis • Herramientas requeridos

CONTENTS 2-Door

A. Track 1

B. Carrier 4

C. Quick Release Top Mount Plate 4

D. Pull 2

E. Door Guide 1

F. #8 x 5/8" Truss Head Screw 16

G. #8 x 3/4" Pan Head Screw 2

H. #8 x 1-1/2" Pan Head Screw 3

I. #8 x 1" Pan Head Screw 16

J. Door Stop 1

#310302_B (1013)

SLIDING DOOR HARDWARE - BY PASS

BYP-75A & BYP-100A • For 2 doors up to 75 lbs. (1572-QR carrier)

& 100 lbs. (1606-QR carrier) each with thickness of 1-3/8" to 1-3/4"

QUINCAILLERIE POUR PORTE COULISSANTE – BY PASS

BYP-75A & BYP-100A • Pour 2 portes jusqu'à 34 kg (1572-QR rouleaux décalés)

y 45,3 kg (1606-QR rouleaux décalés) chacune d'une épasseur de 3,5 cm à 4,4 cm

HERRAJE PARA PUERTA CORREDIZA - TIPO BY PASS

BYP-75A & BYP-100A • Para 2 puertasde hasta 34 kg (1572-QR portador)

y 45,3 kg (1606-QR portator) cada una y de 3,5 cm à 4,4 cm de grosor

#310302_B (1013)

Wrench (included) • Clé (incluse) • Llave (incluida)

Drill (3/32", 3/16", 3/8") • Perceuse (3/32", 3/16", 3/8") • Taladro (3/32", 3/16", 3/8")

Phillips Screw Driver • Tournevis Phillips • Destornillador Phillips

Fine Tooth Saw (optional) • Scie à dents nes (optionnelle) • Sierra de dientes nos (opcional)

Tape Measure • Ruban à mesurer • Cinta métrica

Spade Bit (7/8") • Partie en angle (7/8") • Broca con punta de lanza (7/8")

CONTENIDO 2-Puertas

A. Carril 1

B. Mecanismo de arrastre 4

C. Placa para montaje superior de liberación rápida 4

D. Tirador 2

E. Guía de la puerta 1

CONTENU 2-Portes

A. Rail 1

B. Partie portante 4

C. Plaque supérieure à relâchement rapide 4

D. Tirer 2

E. Guide de Porte 1

CONTENU 2-Portes

F. #8 x 5/8" Vis a tête bombée 16

G. #8 x 3/4" Vis tête cylindrique 2

H. #8 x 1-1/2" Vis a tête bombée 3

I. #8 x 1" Vis a tête bombée 16

J. Buttoir de porte 1

CONTENIDO 2-Puertas

F. #8 x 5/8" Tornillo de cabeza de armazón 16

G. #8 x 3/4" Tornillos cabeza plana 2

H. #8 x 1-1/2" Tornillos cabeza plana 3

I. #8 x 1" Tornillos cabeza plana 16

J. Tope de la puerta 1

Summary of content (4 pages)

PAGE 1
SLIDING DOOR HARDWARE - BY PASS #310302_B (1013) Assembly Instructions BYP-75A & BYP-100A • For 2 doors up to 75 lbs. (1572-QR carrier) & 100 lbs.
PAGE 2
#310302_B (1013) SLIDING DOOR HARDWARE - BY PASS 1 prepare opening Assembly Instructions 2-Door Width = 2 x Door Width - 1" 1572-QR (BYP-75) Hmax = Door Height + 2-3/8" Hmin = Door Height + 1-7/8" 1572-QR (BYP-75): 1-1/2" - 1-7/8" (3,8 cm - 4,8 cm) 1606-QR (BYP-100): 1-3/4" - 2" (4,4 cm - 5,1 cm) 1606-QR (BYP-100) Hmax = Door Height + 2-1/2" Hmin = Door Height + 2-1/8" Opening Height Hauteur Ouverture Altura Abertura Door Height Hauteur Porte Altura Puerta 3/8" - 1/2" (1 cm - 1,3 cm) 2 MOUNT FRAM
PAGE 3
SLIDING DOOR HARDWARE - BY PASS 4 HANG DOORS • Open quick release latches on brackets. • Slide door onto carrier screws and close latch. • Repeat for front door on front rail. 5 ADJUST AND FINISH • Adjust door to square with sides of door opening by rotating carrier adjustment screw. • Install door guide where doors overlap. Use (#8 x 1-1/2") screws (H) to secure to the floor. • Mount door stop to inside surface of front door.
PAGE 4
quincaillerie pour porte coulissante - By Pass herraje para puerta corrediza - tipo by pass de 1 Préparation l’ouverture 1 Preparar abertura 1572-QR: Altura máxima = Altura de la puerta + 6 cm 1572-QR: Altura mínima = Altura de la puerta + 4,8 cm 1606-QR: Altura máxima = Altura de la puerta + 6,4 cm 1606-QR: Altura mínima = Altura de la puerta + 5,4 cm 1572-QR: Hmax = Haut. porte + 6 cm 1572-QR: Hmin = Haut. porte + 4,8 cm 1606-QR: Hmax = Haut. porte + 6,4 cm 1606-QR: Hmin = Haut. porte + 5,4 cm Larg.