Installation Guide



Installation Instructions

RN230EFS_B_TiltOutHamper_0213

Tilt Out Hamper

Inspect all parts and read all instructions prior to beginning assembly and installation.

Parts Included

A. Hamper basket

B. J-hooks

C. Mounting Screws



• Phillips head screwdriver

• Drill with 1/16” (1.5mm) bit for drilling

pilot holes

• Pencil



TO1710

TO1713

TO1716

Step 1 Open cabinet door and hold hamper in

place on back of door. Hamper is

designed to be installed on the top frame

of the wood where the wood is the

thickest. Caution: Make sure the

mounting screws are not longer than the

thickness of the door by measuring the

thickness at the doorframe.

Step 2 Mark the position of the mounting screw

locations with a pencil. It is

recommended to use small pilot holes

drilled into the door to avoid splitting the

wood. Fasten the J-hooks in place, using

the screws provided. Hand hamper on

J-hooks. Installation is now complete.

step 1

step 2



KNAPE & VOGT MANUFACTURING COMPANY

2700 Oak Industrial Drive NE • Grand Rapids, MI 49505

800.253.1561 • www.kv.com