Specification

ACOUSTICAL PERFORMANCE
EcoBatt insulation provides excellent acoustical properties
and will reduce sound transmission when properly installed in
partition walls and acoustical ceiling and floor systems. Knauf
acoustical/thermal insulation can improve STC ratings in wood
stud construction by 3 to 5 points and metal stud construction
by 8 to 10 points depending upon the complexity of the wall
configurations, R-values and layers of insulation.
FIBERGLASS AND MOLD
Fiberglass insulation will not sustain mold growth. However,
mold can grow on almost any material when it becomes wet
and contaminated. Carefully inspect any insulation that has
been exposed to water. If it shows any sign of mold, it must be
discarded. If the material is wet, but shows no evidence of mold,
it should be dried rapidly and thoroughly. If it shows signs of
facing degradation from wetting, it should be replaced.
KNAUF INSULATION, INC.
One Knauf Drive
Shelbyville, IN 46176
Technical Support
[phone] ext. 8727
[e-mail]
02-20
© 2020 Knauf Insulation, Inc.
Check with your Knauf Insulation Territory Manager to ensure information is current.
The chemical and physical properties of this product represent average values
determined in accordance with accepted test methods. The data is subject to normal
manufacturing variations. The data is supplied as a technical service and is subject
to change without notice. References to numerical ame spread ratings are not intended
to reect hazards presented by these or any other materials under actual re conditions.
This product is covered by one or more U.S. and/or other patents.
See patent www.knaufnorthamerica.com/patents
Visit knaufnorthamerica.com to learn more.
CERTIFICATIONS