User Guide

71 22 200
~
~
60 mm
71 21 200 71 01 200
20° angled head for flush cutting
The new CoBolt version with angled head and newly designed
joint construction now also allows almost flush cutting.
The handles, which now run at an angle to the cutting blades,
also offer ample space for gripping.
Very slim dual component handles
The dual component handles are now slimmer in total. In
particular the slimmer collar makes it easier to handle the
CoBolt. The contact surface at the end of the handle is wider
than before, allowing a better distribution of pressure, which
makes work more pleasant.
Integrated opening spring with comfortable locking device
The opening spring always presses the pliers into the hand
gently; the effort needed to hold the pliers is considerably
reduced. For secure transport the pliers can be locked with
a spring clip.
with precision cutting edges for soft,
hard and piano wire
cuts material like bolts, nails, rivets, etc.
up to 5.2 mm diameter
exceptional cutting performance with
minimum effort because of highly
effective lever action design
cutting edges additionally induction hardened,
cutting edge hardness approx. 64 HRC
forged
high performance Chrome Vanadium steel,
oil-hardened and tempered
Cut with model 71 21 200:
nearly flush surface
KNIPEX-CoBolt
Compact Bolt Cutters
Easy cutting of bolts, nails and
rivets up to 5.2 mm diameter
Cut with model 71 01 200:
protruding residue