EX-NEXT Manual

Neutral
Neutral
ForwardR
evers
e
(Brake)
ET2
ET3
THROTTLE 1/3
TRIM
FEEL
TRAVEL
SPEED
DYNAMC
REVERS
10
The following function explanation is the case of factory default
settings. When changing KEYSET (key setting); the following
opinions change
Operating trigger, the servo (ESC) connected to 2CH of
the receiver works forward and reverse function.
Modify the maximum amount of throttle brake movement
and forward acceleration movement.
● Travel F(Forward)
From initial screen select [THROTTLE] throttle and press
the ENTER key.
● Travel B(Brake)
Select [THROTTLE] throttle and press the ENTER key.
Select [TRAVEL B] on the THROTTLE menu, and push
ENTER key to adjust
Adjusts the neutral/center position of the throttle stroke
range.The function to make a ne adjustment, operate
ET2 lever in up and down.
● A buzzer sound with a single beep sound when
operated up or down.
● A buzzer sound "Piro" is made when the center trim is
adjusted.
● When exceeding the setting range a "Pi-" sound can be
heard. Please look over your installation and linkage of
the servo horn.
Changing the output directional movement of the servo
when it is moving in the opposite direction. (when the brake
is moving the forward throttle.)
*This function setting "REVERSE" is accessed in the
Steering menu.
Select Steering menu in the initial screen and push Enter.
Select [REVERSE] on the STEERING menu, and push
ENTER key.
* Return reverse setting, perform operation to
to again.
Forward
Increase
Decrease
Reverse
■Trigger
■Throttle Travel
■Throttle Trim
■Throttle Reverse
●THROTTLE
For GP cars, a strong setting for the brake can damage the servo.
ST REVERSE
TH REVERSE
REVS
NORM
REVERSE
The setting of [TRAVEL B] can be changed by operating the ET3
lever.
P
Select [TRAVEL] on the THROTTLE menu, and push
ENTER key.
Change setting from NORM to REVS.
THROTTLE 1/3
SPEED
DYNAMC
TRIM
FEEL
REVERS
TRAVEL
N
B100%
TH TRAVEL
F 100 ％
TH TRAVEL