EX-NEXT Manual

67((5,1*
5(9(56
'<1$0&
75,0
63(('
)((/
75$9(/
MONITOR XT-TMG DR5.8V
MODEL NO.01
STEERING
THROTTLE
STEERING
FUNCTION
THROTTLE
MONITOR XT-TMG DR5.8V
MODEL NO.01
STEERING
THROTTLE
FUNCTION
STEERING
THROTTLE
14
Basic Operation 1: Selecting from a Menu
This explanation uses [Steering] as an example.
Use the R(>) key to move the cursor over [Steering].
Press the ENTER key to change to the Steering Menu screen
Basic Operation 2: Changing a Setting Value
This explanation uses [TURN 1] on the Steering Speed screen as an example.
Operate the R (>) key to set to [SPEED] (ST SPEED), and then press the ENT key to switch to the setting menu.
Operate the R (>) key for move the cursol to the value (100%) of [TURN1] (ST SPEED turn speed 1). (Figure left)
Press ENTER key to select it for modication.
The cursor starts ashing. Please change the value by operating R(>) and L(<) Key. (Figure right Changed to 50%)
Press ENT key when change value is nished.
■ Display and Control Method for attaching the Xpansion unit■ Display and Control Method for attaching the Xpansion unit
●Name of each parts and Basic operation.
BACK Key L(<) Key R(>) Key
Command button
Communication Port
Used for rmware upgrading.
Please refer to an update
manual for the details.
Used for rmware upgrading and ICS
communication.
Please refer to an update manual for the
details.
ENTKey
Controlling of the setting adjustments is done via the L(<) key, R(>)key, ENTER(ENT) key, and
BACK key.
ENT Key : Selecting item to be modied; Conrming a change after a setting change.
L(<)Key : Used to move cursor between m enu choices and to change a setting value.
Lowering a value (for L/R cases: raising toward L); Return to a previous menu item.
R(>)Key : Used to move cursor between menu choices and to change a setting value. Raising
value (for L/R cases: raising toward R); Proceed to next menu item.
BACK Key : Returning to previous screen; Canceling change.
L(<)Key+R(>)Key Pressing simultaneously : Reset value to factory setting.
Operation