EX-NEXT Manual

PUSH
XT-TMG
IJKLMNOP
V
16
Function Monitor: Functions that are active will be lit up.
Steering Monitor: Displays the position of the steering operation.
Throttle Trim Monitor: Displays the position of the throttle trim.
Top menu: Display three kinds of setting items
FUNCTION : Modify settings related to functions.
STEERING : Modify settings related to the steering.
THROTTLE : Modify settings related to the throttle.
RF Mode :
RF mode which is being used is displayed.
Power Source Type : Selected battery mode is displayed
.
Voltage:
Displays the current power source voltage.
Model Number:
Displays the currently selected model number.
Model Name: Displays the name of the currently selected model number.
●Startup Screen and Initial Screen
When the transmitter is switched on, the startup screen will display, followed by the initial screen.
* Pressing the ENTER key during the startup screen will allow you to proceed to the initial screen.
Version Information :
Displays the version of the program that is installed in the Msater Unit's CPU.
This product's performance may be upgraded via paid or free upgrades.
Check the KO Propo website for information regarding such upgrades
.(https://www.kopropo.co.jp)
* The upper row is the expansion version, and the lower row is the master unit version.
Please check the version upgrade guide to see which one to refer to.
Startup Screen
Initial Screen
OR Steering and Brake travel Override
AUT Throttle Auto Start
CYC Cycle Throttle Acceleration/Throttle ABS)
OFS Offset Drag Brake/Idle Up
PUSH : Push
When left side functions are not
active, "MONITOR" is displayed.
LP : Lipo Battery
LF : LiFe Battery
DR : R03/AAA/UM4 Alkaline Batteries
NI : Ni-MH Battery
XT-ADG : ADV (Highest speed, one way communication)
XT-TMG : TLMY (Middle speed, two way communication)
MX-FG : MX-F (Slowest speed, one way communication)
XT-ADF : ADV (Highest speed, one way communication and France mode)
XT-TMF : TLMY (Middle speed, two way communication and France mode)
MX-FF : MX-F (Slowest speed, one way communication and France mode)
(Notice) If you switch battery types, make sure to also change the [Battery] setting.